Asus Q504Ua Bhi5T13 Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 - 40 minutes            

Sections

2

• Back Panel
• 5 steps
• Display Assembly
• 3 steps

Flags

0

• BackAsus Q504UA-BHI5T13

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Ensure that the laptop is off so you do not shock yourself.

Ensure that the laptop is off so you do not shock yourself.

1024

Step 2

• Use the T5 Torx screwdriver to remove the ten 1mm screws located around the back cover.

Use the T5 Torx screwdriver to remove the ten 1mm screws located around the back cover.

Step 3

• Remove the two rubber pads nearest to you using the metal spudger.

Remove the two rubber pads nearest to you using the metal spudger.

Step 4

• Use the Phillips #0 screwdriver to remove the two 4mm screws that are under the rubber pads.

Use the Phillips #0 screwdriver to remove the two 4mm screws that are under the rubber pads.

Step 5

• Insert any of the plastic opening tools into the seam to separate the back cover (it is recommended to start at the corner of the hinges). If you did it right, then the cover should pop off.
• Be careful as you may damage the tabs.

Insert any of the plastic opening tools into the seam to separate the back cover (it is recommended to start at the corner of the hinges). If you did it right, then the cover should pop off.

Be careful as you may damage the tabs.

Step 6

              Display Assembly               

• Use the Phillips #0 screwdriver to remove the six 5.00 mm screws connected to the hinges of the display assembly.

Use the Phillips #0 screwdriver to remove the six 5.00 mm screws connected to the hinges of the display assembly.

Step 7

• Remove the two connectors with your hands, as shown.

Remove the two connectors with your hands, as shown.

Step 8

• Hold the display assembly with two hands and pull upwards to remove.

Hold the display assembly with two hands and pull upwards to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Jacob Fritsch                     

Member since: 11/04/2019

337 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       IUPUI, Team S1-G2, Henning Fall 2019                        

                                                  Member of IUPUI, Team S1-G2, Henning Fall 2019 



                    IUPUI-HENNING-F19S1G2                     


                                            3 Members                     


                                            3 Guides authored                     

smej - Feb 24, 2021

Reply

Is this call soemthing else. I cannot find the complete assembly. My hinges are broken off and the front black bottom is split so I would like to have the entire assembly so that I could replace it all.