Asus Q525U Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

Back Cover
3 steps
Battery
3 steps

Flags

BackAsus Q525U
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Before beginning this guide, be sure to turn off your laptop and disconnect from the power adapter.

What you need

Step 1

              Back Cover

Begin by powering off the device and flipping the device over.
Carefully remove the two longer 9.5 mm screws on the corners with a Phillips #1 screwdriver.
Remove the eight 7.5 mm Phillips #1 screws on the back of the device.

Begin by powering off the device and flipping the device over.

Carefully remove the two longer 9.5 mm screws on the corners with a Phillips #1 screwdriver.

Remove the eight 7.5 mm Phillips #1 screws on the back of the device.

1024

Step 2

Use an opening pick to separate the back cover from the device.
For easiest removal, begin by prying at one of the front corners and sliding the tool under the cover in a counter-clockwise motion (to the left) toward the laptop hinge.

Use an opening pick to separate the back cover from the device.

For easiest removal, begin by prying at one of the front corners and sliding the tool under the cover in a counter-clockwise motion (to the left) toward the laptop hinge.

Step 3

Once the cover has been separated from the device, carefully lift the back cover off the device (begin by lifting from the front of the cover first).
The back cover should be easily removable, allowing full access to all of the internal components.

Once the cover has been separated from the device, carefully lift the back cover off the device (begin by lifting from the front of the cover first).

The back cover should be easily removable, allowing full access to all of the internal components.

Step 4

              Battery

The battery of the device is outlined in red.
Using a Phillips #1 screwdriver, remove the four 5 mm screws that are holding the battery in place.

The battery of the device is outlined in red.

Using a Phillips #1 screwdriver, remove the four 5 mm screws that are holding the battery in place.

Step 5

Using the Halberd spudger, carefully lift the battery connector up to disconnect it from the motherboard.

Using the Halberd spudger, carefully lift the battery connector up to disconnect it from the motherboard.

Step 6

Lift the battery out of the frame to remove.

Lift the battery out of the frame to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Will Targonski

Member since: 02/22/2022

150 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Clemson, Team 2-5, Hunter Spring 2022                        

                                                  Member of Clemson, Team 2-5, Hunter Spring 2022 



                    CLEM-HUNTER-S22S2G5                     


                                            4 Members                     


                                            8 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team