Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes

Sections

2

  • Back Cover
  • 3 steps
  • Wi-Fi Card
  • 3 steps

Flags

0

  • BackAsus Q525U

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before beginning this repair be sure to carefully read each step in order to successfully understand the necessary procedure. Make sure your device is turned off and disconnected from the power adapter.

What you need

Step 1

              Back Cover
  • Begin by powering off the device and flipping the device over.
  • Carefully remove the two longer 9.5 mm screws on the corners with a Phillips #1 screwdriver.
  • Remove the eight 7.5 mm Phillips #1 screws on the back of the device.

Begin by powering off the device and flipping the device over.

Carefully remove the two longer 9.5 mm screws on the corners with a Phillips #1 screwdriver.

Remove the eight 7.5 mm Phillips #1 screws on the back of the device.

1024

Step 2

  • Use an opening pick to separate the back cover from the device.
  • For easiest removal, begin by prying at one of the front corners and sliding the tool under the cover in a counter-clockwise motion (to the left) toward the laptop hinge.

Use an opening pick to separate the back cover from the device.

For easiest removal, begin by prying at one of the front corners and sliding the tool under the cover in a counter-clockwise motion (to the left) toward the laptop hinge.

Step 3

  • Once the cover has been separated from the device, carefully lift the back cover off the device (begin by lifting from the front of the cover first).
  • The back cover should be easily removable, allowing full access to all of the internal components.

Once the cover has been separated from the device, carefully lift the back cover off the device (begin by lifting from the front of the cover first).

The back cover should be easily removable, allowing full access to all of the internal components.

Step 4

              Wi-Fi Card
  • The Wi-Fi card is located above the CMOS coin cell battery and below one of the hinges.
  • Using a Phillips #1 screwdriver, remove one 2 mm screw, that holds the card in place.

The Wi-Fi card is located above the CMOS coin cell battery and below one of the hinges.

Using a Phillips #1 screwdriver, remove one 2 mm screw, that holds the card in place.

Step 5

  • Use a pair of pointed tweezers to disconnect the small black and white coaxial connectors from the Wi-Fi card.

Use a pair of pointed tweezers to disconnect the small black and white coaxial connectors from the Wi-Fi card.

Step 6

  • Use the pointed tweezers to pull the network card out and away from the socket.

Use the pointed tweezers to pull the network card out and away from the socket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Stewart Crandall

Member since: 02/22/2022

550 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 2-5, Hunter Spring 2022                        

                                                  Member of Clemson, Team 2-5, Hunter Spring 2022 



                    CLEM-HUNTER-S22S2G5                     


                                            4 Members                     


                                            8 Guides authored