Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
2
- Battery
- 4 steps
- RAM
- 2 steps
Flags
0
BackAsus Q534U
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The RAM is located underneath a metal cover on the motherboard so it will not be immediately visible upon opening the case. However, the metal cover can be easily pried from the motherboard, for it is affixed by a clip mechanism rather than screws or glue. To replace the metal cover, be sure to align all four sides of the cover with each of the clips and simply press it into place.
What you need
Step 1
Back Case Removal
- Make sure the device is turned off and unplugged from the charger.
- Use a T5 screwdriver to remove all 10 screws that secure the bottom cover.
- Pull off the back cover of the laptop.
- A pry tool may be needed to pull off the back cover.
Make sure the device is turned off and unplugged from the charger.
Use a T5 screwdriver to remove all 10 screws that secure the bottom cover.
Pull off the back cover of the laptop.
A pry tool may be needed to pull off the back cover.
1024
Step 2
- Wedge an opening tool under the battery’s bundled cable connector, and gently pry the connector up and to disconnect the battery.
Wedge an opening tool under the battery’s bundled cable connector, and gently pry the connector up and to disconnect the battery.
Step 3
- Lift up the black tab next to the silver ribbon cable.
- Pull lightly on the blue tabs until the silver cable is free.
Lift up the black tab next to the silver ribbon cable.
Pull lightly on the blue tabs until the silver cable is free.
Step 4
- Use a Phillips #00 screwdriver to remove the 5 marked screws.
- Gently remove the battery.
- Do not bend or puncture the laptop’s lithium-polymer pattery.
Use a Phillips #00 screwdriver to remove the 5 marked screws.
Gently remove the battery.
Do not bend or puncture the laptop’s lithium-polymer pattery.
Step 5
RAM
- Locate the metal RAM cover
- Pull the metal tab on the corner of the metal cover to lift the cover from its clips
- A pry tool may provide a better grip on small tab.
Locate the metal RAM cover
Pull the metal tab on the corner of the metal cover to lift the cover from its clips
A pry tool may provide a better grip on small tab.
Step 6
- While pushing out the metal clips on both sides of the RAM, lift up the RAM to release it
- Pull the RAM out gently and bring it up from the slot
- Make sure to pull out first and then pull the RAM up out of place
While pushing out the metal clips on both sides of the RAM, lift up the RAM to release it
Pull the RAM out gently and bring it up from the slot
Make sure to pull out first and then pull the RAM up out of place
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 7 other contributors
Kyle Whalen
Member since: 10/17/2017
181 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team S66-G6, Rockett Fall 2017
Member of UMass Dartmouth, Team S66-G6, Rockett Fall 2017
UMASSD-ROCKETT-F17S66G6
3 Members
5 Guides authored
Elijah Elliott - Oct 8, 2018
Reply
One question: I have this model and have determined that I have a bad stick of RAM. I have removed this stick but still have 8 gigs available. Is there another stick that I m not seeing or is this built in?
SvGGRK - Dec 28, 2021
Reply
saame here must be another stick somewhere