Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes

Sections

2

  • Battery
  • 4 steps
  • Wi-Fi card
  • 2 steps

Flags

0

  • BackAsus Q534U

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

It does require removing the battery, so use caution as a punctured battery can cause a dangerous fire.

What you need

Step 1

              Back Case Removal
  • Make sure the device is turned off and unplugged from the charger.
  • Use a T5 screwdriver to remove all 10 screws that secure the bottom cover.
  • Pull off the back cover of the laptop.
  • A pry tool may be needed to pull off the back cover.

Make sure the device is turned off and unplugged from the charger.

Use a T5 screwdriver to remove all 10 screws that secure the bottom cover.

Pull off the back cover of the laptop.

A pry tool may be needed to pull off the back cover.

1024

Step 2

  • Wedge an opening tool under the battery’s bundled cable connector, and gently pry the connector up and to disconnect the battery.

Wedge an opening tool under the battery’s bundled cable connector, and gently pry the connector up and to disconnect the battery.

Step 3

  • Lift up the black tab next to the silver ribbon cable.
  • Pull lightly on the blue tabs until the silver cable is free.

Lift up the black tab next to the silver ribbon cable.

Pull lightly on the blue tabs until the silver cable is free.

Step 4

  • Use a Phillips #00 screwdriver to remove the 5 marked screws.
  • Gently remove the battery.
  • Do not bend or puncture the laptop’s lithium-polymer pattery.

Use a Phillips #00 screwdriver to remove the 5 marked screws.

Gently remove the battery.

Do not bend or puncture the laptop’s lithium-polymer pattery.

Step 5

              Wi-Fi card
  • Disconnect the WiFi antenna cables by gently pulling them in an upwards motion.
  • Needle nose pliers can be used as a detaching tool.

Disconnect the WiFi antenna cables by gently pulling them in an upwards motion.

Needle nose pliers can be used as a detaching tool.

Step 6

  • Using a Phillips #0 screwdriver, remove the screw holding the WiFi card down.
  • Pull the WiFi card out of the socket toward the fan housing.

Using a Phillips #0 screwdriver, remove the screw holding the WiFi card down.

Pull the WiFi card out of the socket toward the fan housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors 


                    Eric Okoko

Member since: 10/19/2017

327 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S66-G6, Rockett Fall 2017                        

                                                  Member of UMass Dartmouth, Team S66-G6, Rockett Fall 2017 



                    UMASSD-ROCKETT-F17S66G6                     


                                            3 Members                     


                                            5 Guides authored