Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
2
- Battery
- 4 steps
- Hard Drive
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackASUS Q550LF-BBI7T07
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a T4 Torx screwdriver head to remove the ten 4mm Torx head screws on the bottom of the laptop.
Use a T4 Torx screwdriver head to remove the ten 4mm Torx head screws on the bottom of the laptop.
1024
Step 2
- Use an opening tool to pry open the rear cover. Lift the cover off and away from the board.
Use an opening tool to pry open the rear cover. Lift the cover off and away from the board.
Step 3
- Use a Phillips #0 screwdriver head to remove the three black 7mm Phillips head screws that hold the battery in place.
Use a Phillips #0 screwdriver head to remove the three black 7mm Phillips head screws that hold the battery in place.
Step 4
- Once the screws have been removed, gently lift the battery out.
Once the screws have been removed, gently lift the battery out.
Step 5
Hard Drive
- Use the Phillips #0 Screwdriver to unscrew the four silver 5mm screws.
Use the Phillips #0 Screwdriver to unscrew the four silver 5mm screws.
Step 6
- Gently disconnect the Hard Drive from the connector cable. Lift it out and remove it.
Gently disconnect the Hard Drive from the connector cable. Lift it out and remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Chance Woudenberg
Member since: 10/02/2018
673 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team S2-G1, Munoz Fall 2018
Member of Eastern Washington University, Team S2-G1, Munoz Fall 2018
EWU-MUNOZ-F18S2G1
4 Members
5 Guides authored
