Difficulty
Easy
Steps
4
Time Required
7 minutes
Sections
2
- Back Panel
- 2 steps
- Battery
- 2 steps
Flags
0
BackAsus Q551L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 , two of them are 0.0793 JIS #0.
Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 , two of them are 0.0793 JIS #0.
1024
Step 2
- Use the plastic opening tool to pry the back panel off the base of the laptop.
Use the plastic opening tool to pry the back panel off the base of the laptop.
Step 3
Battery
- Unscrew the four screws to remove the battery.
Unscrew the four screws to remove the battery.
Step 4
- Un-clip both wire clips on the upper and right side of the battery.
- Lift the battery out of the device.
Un-clip both wire clips on the upper and right side of the battery.
Lift the battery out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 5 other contributors
Drew Lawson
Member since: 04/09/2018
360 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
Eastern Washington University, Team S3-G2, Rowley Spring 2018
Member of Eastern Washington University, Team S3-G2, Rowley Spring 2018
EWU-ROWLEY-S18S3G2
3 Members
4 Guides authored
wolf brown - Sep 11, 2020
Reply
Is there a part to order if the solder gives from the mother board connection peice. My cable came up from the board with connection still attached