Difficulty
Easy
Steps
6
Time Required
3 minutes
Sections
2
- Back Panel
- 2 steps
- Hard Drive
- 4 steps
Flags
0
BackAsus Q551L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
You will need to do that if the hard drive is in a good condition but the computer is not, replace it to a new one to increase the speed and capacity, or the hard drive has experienced a hardware failure.
What you need
Step 1
Back Panel
- Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 , two of them are 0.0793 JIS #0.
Unscrew the 10 screws around the edge of the back panel. Eight of the screws are 0.0793mm T5 , two of them are 0.0793 JIS #0.
1024
Step 2
- Use the plastic opening tool to pry the back panel off the base of the laptop.
Use the plastic opening tool to pry the back panel off the base of the laptop.
Step 3
Hard Drive
- Unscrew the four 0.0793 mm screws.
Unscrew the four 0.0793 mm screws.
Step 4
- Using the PH0 and screwdriver from the 54 Bit Driver kit.
Using the PH0 and screwdriver from the 54 Bit Driver kit.
Step 5
- After removing the four screws, gently push the hard drive downward as shown.
After removing the four screws, gently push the hard drive downward as shown.
Step 6
- Lift the hard drive up.
Lift the hard drive up.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 2 other contributors
Wesam Badughaysh
Member since: 04/09/2018
354 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Eastern Washington University, Team S3-G3, Rowley Spring 2018
Member of Eastern Washington University, Team S3-G3, Rowley Spring 2018
EWU-ROWLEY-S18S3G3
6 Members
6 Guides authored
