Asus Q552Ub Bhi7T12 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          30 minutes            

Sections

1

• Screen
• 7 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackAsus Q552UB-BHI7T12

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The process of removing the screen has multiple steps as demonstrated in the images below. In order to replace the screen, you will require both a Phillip’s head screwdriver and an opening tool. This guide can also be used in reverse to model putting the screen back onto the laptop.

Before using this guide, remember to visit the Asus troubleshooting page to ensure that removing the screen is the appropriate solution to your system issues.

What you need

Step 1

              Screen               

• Remove the two screw covers by hand or by using the pointed end of a spudger.

Remove the two screw covers by hand or by using the pointed end of a spudger.

1024

Step 2

• Remove both screws with a Phillips head screwdriver.

Remove both screws with a Phillips head screwdriver.

Step 3

• Wedge an opening tool between the two halves of the screen.
• Keep the two latches together and go completely around the screen to release all the latches.

Wedge an opening tool between the two halves of the screen.

Keep the two latches together and go completely around the screen to release all the latches.

Step 4

• Separate the two parts of the screen.

Separate the two parts of the screen.

Step 5

• Remove any tape that is holding the screen in place.

Remove any tape that is holding the screen in place.

Step 6

• Use an opening tool to lift out the screen after all the tape is removed.
• The screen may be stuck due to any tape or any remaining glue.

Use an opening tool to lift out the screen after all the tape is removed.

The screen may be stuck due to any tape or any remaining glue.

Step 7

• Pull the screen horizontally away to remove the last cable attached to the screen.

Pull the screen horizontally away to remove the last cable attached to the screen.

Follow these instructions in reverse order to reassemble your device.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Alexander Boettcher                     

Member since: 09/25/2017

633 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       University of North Texas, Team S6-G5, Thomas Fall 2017                        

                                                  Member of University of North Texas, Team S6-G5, Thomas Fall 2017 



                    UNT-THOMAS-F17S6G5                     


                                            4 Members                     


                                            5 Guides authored                     

Bustelo Pilon - May 30, 2018

Reply

Can you show the connection on motherboard for LCD cable?

Anthony C - Feb 14, 2021

Reply

Does anyone know where I can get this same model replacement?