Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Display
- 5 steps
Flags
0
BackAsus R510CA-OB01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Display
- Open the device.
- Remove the black plastic squares on each side with a spudger.
Open the device.
Remove the black plastic squares on each side with a spudger.
1024
Step 2
- Remove the two 5mm screws at each bottom corner of the display using a Phillips #0 screwdriver.
Remove the two 5mm screws at each bottom corner of the display using a Phillips #0 screwdriver.
Step 3
- After the two screws are removed, use a plastic opening tool to remove the black cover around the screen.
After the two screws are removed, use a plastic opening tool to remove the black cover around the screen.
Step 4
- Remove the four 5mm screws that attach the screen with a Philips #0 screwdriver.
Remove the four 5mm screws that attach the screen with a Philips #0 screwdriver.
Step 5
- Lift up the screen from the back of the laptop and then you will see a cable connected to the screen.
- You can simply disconnect the cable and insert a new screen.
Lift up the screen from the back of the laptop and then you will see a cable connected to the screen.
You can simply disconnect the cable and insert a new screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Blanche Pinto
Member since: 09/28/2017
437 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team S3-G4, Nance Fall 2017
Member of USF Tampa, Team S3-G4, Nance Fall 2017
USFT-NANCE-F17S3G4
2 Members
4 Guides authored
