Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
1
- Hard Drive
- 5 steps
Flags
0
BackAsus R510CA-OB01
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Shut down the computer and disconnect all external devices connected to it.
- Turn the computer so that it is upside down. Position the computer with the front towards you.
Shut down the computer and disconnect all external devices connected to it.
Turn the computer so that it is upside down. Position the computer with the front towards you.
1024
Step 2
- Loosen the two 12 mm screws on the bottom panel of your device using a Phillips size 0 bit.
Loosen the two 12 mm screws on the bottom panel of your device using a Phillips size 0 bit.
Step 3
- Use the grips to slide the panel off.
- Remove the panel by lifting it off the device.
Use the grips to slide the panel off.
Remove the panel by lifting it off the device.
Step 4
- Loosen the three 5 mm screws holding down the hard drive using a Phillips #00 bit.
Loosen the three 5 mm screws holding down the hard drive using a Phillips #00 bit.
Step 5
- Slide the casing (hard drive bay) for the hard drive to the left.
- Lift it to remove it from the device.
Slide the casing (hard drive bay) for the hard drive to the left.
Lift it to remove it from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Blanche Pinto
Member since: 09/28/2017
437 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team S3-G4, Nance Fall 2017
Member of USF Tampa, Team S3-G4, Nance Fall 2017
USFT-NANCE-F17S3G4
2 Members
4 Guides authored