Difficulty
Easy
Steps
4
Time Required
2 - 5 minutes
Sections
1
- Hard Drive
- 4 steps
Flags
0
BackAsus R510LA-RS71
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Remove the bottom left and right 12.7mm screws using a JIS 00 screwdriver.
Remove the bottom left and right 12.7mm screws using a JIS 00 screwdriver.
1024
Step 2
- Slide back and remove the protective plating on the back of the laptop.
Slide back and remove the protective plating on the back of the laptop.
Step 3
- Again with the JIS 00, unscrew the three 5.7mm screws holding the hard drive in place. These can be found on small brackets on the four corners of the drive.
Again with the JIS 00, unscrew the three 5.7mm screws holding the hard drive in place. These can be found on small brackets on the four corners of the drive.
Step 4
- Slide the hard drive to the left, then remove it by lifting it from the compartment it is resting in.
Slide the hard drive to the left, then remove it by lifting it from the compartment it is resting in.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Spencer Whitworth
Member since: 02/15/2018
186 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S1-G6, Leahy Spring 2018
Member of USF Tampa, Team S1-G6, Leahy Spring 2018
USFT-LEAHY-S18S1G6
4 Members
5 Guides authored
