Difficulty
Moderate
Steps
5
Time Required
5 minutes
Sections
1
- Screen
- 5 steps
Flags
0
BackAsus R510LA-RS71
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Using a metal spudger, pick out the stoppers located on the bottom left/right corners of the screen, revealing the screws underneath them.
- Unscrew the two 4.25mm screws with the JIS 00 screwdriver.
Using a metal spudger, pick out the stoppers located on the bottom left/right corners of the screen, revealing the screws underneath them.
Unscrew the two 4.25mm screws with the JIS 00 screwdriver.
1024
Step 2
- Using the metal spudger, pry off the edges of the screen’s frame from the outside.
Using the metal spudger, pry off the edges of the screen’s frame from the outside.
Step 3
- There should be four silver brackets holding the screen in place underneath. Unscrew the center 3.35mm screws in each bracket as shown with the JIS 00 screwdriver.
There should be four silver brackets holding the screen in place underneath. Unscrew the center 3.35mm screws in each bracket as shown with the JIS 00 screwdriver.
Step 4
- Slowly remove the monitor from its recess.
Slowly remove the monitor from its recess.
Step 5
- Place the monitor face down. Slowly remove the adhesive tape on the back of the monitor, and remove the connector that the tape is holding.
Place the monitor face down. Slowly remove the adhesive tape on the back of the monitor, and remove the connector that the tape is holding.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Deliyanis Rosa
Member since: 02/15/2018
283 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team S1-G6, Leahy Spring 2018
Member of USF Tampa, Team S1-G6, Leahy Spring 2018
USFT-LEAHY-S18S1G6
4 Members
5 Guides authored