Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

1

  • Battery
  • 6 steps

Flags

0

  • BackAsus Laptop

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop so the bottom is facing upward.
  • Remove ten screws using a Phillips #0 screwdriver.

Flip the laptop so the bottom is facing upward.

Remove ten screws using a Phillips #0 screwdriver.

1024

Step 2

  • Using your fingertips, carefully pull the backplate in an upright direction.
  • Continue along the edges until the backplate is fully removed.
  • It’s normal to hear cracking while pulling up on the plate.

Using your fingertips, carefully pull the backplate in an upright direction.

Continue along the edges until the backplate is fully removed.

It’s normal to hear cracking while pulling up on the plate.

Step 3

  • Remove the four screws from the battery using a Phillips #0 screwdriver.
  • Pull up on the cable connected to the motherboard to remove.
  • Remove the battery from the bay.

Remove the four screws from the battery using a Phillips #0 screwdriver.

Pull up on the cable connected to the motherboard to remove.

Remove the battery from the bay.

Step 4

  • Place the new battery in the bay.
  • Install the battery cable to the motherboard, applying pressure in a downward direction.
  • Screws the screws back in using a Phillips #0 screwdriver.

Place the new battery in the bay.

Install the battery cable to the motherboard, applying pressure in a downward direction.

Screws the screws back in using a Phillips #0 screwdriver.

Step 5

  • Align the backplate.
  • Starting with the upper right corner, apply pressure in a downward angle.
  • Repeat the process around the backplate until it’s fully secure.

Align the backplate.

Starting with the upper right corner, apply pressure in a downward angle.

Repeat the process around the backplate until it’s fully secure.

Step 6

  • Screw the backplate screws back in using a Phillips #0 screwdriver.

Screw the backplate screws back in using a Phillips #0 screwdriver.

Once the new battery is installed, leave the charger connected to the laptop over night to ensure the battery is holding a charge

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Joshua Chavez

Member since: 01/31/2022

160 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       CSU Los Angeles, Team 4-49, Briggs Spring 2022                        

                                                  Member of CSU Los Angeles, Team 4-49, Briggs Spring 2022 



                    CSULA-BRIGGS-S22S4G49                     


                                            1 Member                     


                                            1 Guide authored