Difficulty
Easy
Steps
5
Time Required
6 minutes
Sections
1
- RAM
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackASUS ROG G46VW
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Lift the screw cover and remove the screw using a Phillips #0 screwdriver.
Lift the screw cover and remove the screw using a Phillips #0 screwdriver.
1024
Step 2
- Remove the RAM cover by lifting the screw cover and pulling away firmly.
Remove the RAM cover by lifting the screw cover and pulling away firmly.
Step 3
- Push outwards on the clips to release the RAM stick. The stick should pop up at an angle.
Push outwards on the clips to release the RAM stick. The stick should pop up at an angle.
Step 4
- Pull out the RAM stick carefully.
- Do not use a prying motion as this will damage the hardware. Be careful not to damage the gold section of the RAM stick.
Pull out the RAM stick carefully.
Do not use a prying motion as this will damage the hardware. Be careful not to damage the gold section of the RAM stick.
Step 5
- Repeat steps 3-4 to remove the second RAM stick.
Repeat steps 3-4 to remove the second RAM stick.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Amon Stewart
Member since: 09/21/2018
454 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
University of North Texas, Team S6-G3, Thompson Fall 2018
Member of University of North Texas, Team S6-G3, Thompson Fall 2018
UNT-THOMPSON-F18S6G3
4 Members
7 Guides authored