Difficulty
Moderate
Steps
8
Time Required
20 minutes
Sections
3
- Battery
- 3 steps
- Keyboard
- 2 steps
- Back Panel
- 3 steps
Flags
0
BackASUS ROG G53SW-XT1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Unplug the power cable and flip the computer over.
Unplug the power cable and flip the computer over.
1024
Step 2
- Unlock the battery by pushing the switch to the right.
Unlock the battery by pushing the switch to the right.
Step 3
- Push and hold the left switch, then pull the battery out.
Push and hold the left switch, then pull the battery out.
Step 4
Keyboard
- Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.
Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.
Step 5
- Disconnect the keyboard ribbon cables from the motherboard.
Disconnect the keyboard ribbon cables from the motherboard.
Step 6
Back Panel
- Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.
Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.
Step 7
- Remove the fourteen Phillips #0 screws.
Remove the fourteen Phillips #0 screws.
Step 8
- Flip the laptop over and pull off the bottom cover.
Flip the laptop over and pull off the bottom cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
scott smith
Member since: 02/12/2018
124 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
University of North Texas, Team S4-G4, Thompson Spring 2018
Member of University of North Texas, Team S4-G4, Thompson Spring 2018
UNT-THOMPSON-S18S4G4
3 Members
5 Guides authored