Asus Rog G55Vw Dh71 Camera Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          10 - 20 minutes            

Sections

1

• Camera
• 3 steps

Flags

0

• BackAsus ROG G55VW-DH71

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

To begin following this guide and upgrading your laptop camera successfully, you’d only need an iFixit Opening tool and a pair of tweezers. Additionally, make sure to perform step one where you separate the frame gently and don’t completely remove the plastic frame piece. Make sure that when using your pair of tweezers in step three that you use them gently as well. Along with this, when opening the screen, gently use the iFixit opening tool to ensure that damage is not done to the screen or the surrounding plastic casing. If not opened gently, there is a chance that the plastic casing can break or the screen can shatter.

What you need

Step 1

              Camera               

• Using your iFixit opening tool, separate the frame by gently prying the two seams apart without completely removing the plastic frame piece.

Using your iFixit opening tool, separate the frame by gently prying the two seams apart without completely removing the plastic frame piece.

1024

Step 2

• Once the frame is separated from the screen you will see the camera located in the top middle of the computer.
• Using your iFixit opening tool, push the camera forward from behind, popping it out.

Once the frame is separated from the screen you will see the camera located in the top middle of the computer.

Using your iFixit opening tool, push the camera forward from behind, popping it out.

Step 3

• Once the camera is accessible you will see it is connected to the laptop by a small wire that is clipped into the camera.
• Using tweezers, gently pinch each side of the clipped in attachment that is connected to the camera to separate the computers wire from the old camera.

Once the camera is accessible you will see it is connected to the laptop by a small wire that is clipped into the camera.

Using tweezers, gently pinch each side of the clipped in attachment that is connected to the camera to separate the computers wire from the old camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Savanna Stockman                     

Member since: 01/16/2019

641 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Eastern Washington University, Team S1-G2, Crawford Winter 2019                        

                                                  Member of Eastern Washington University, Team S1-G2, Crawford Winter 2019 



                    EWU-CRAWFORD-W19S1G2                     


                                            4 Members                     


                                            5 Guides authored