Asus Rog G74Sx Dh73 3D Track Pad Buttons Replacement Repair Guide

Difficulty

Difficult

Steps

7

Time Required

                          1 - 2 hours            

Sections

2

• Battery
• 1 step
• Track Pad Buttons
• 6 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackAsus ROG G74SX-DH73-3D

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• With your right hand, push the latch completely up to where you can see the battery pop slightly up. Pick and pull at the tab with your left hand.
• You can now fully remove the battery from the device.

With your right hand, push the latch completely up to where you can see the battery pop slightly up. Pick and pull at the tab with your left hand.

You can now fully remove the battery from the device.

1024

Step 2

              Track Pad Buttons               

• Remove the large flathead screw holding the back cover in place.
• Pull the cover off by prying it open starting from the top center and moving outwards.

Remove the large flathead screw holding the back cover in place.

Pull the cover off by prying it open starting from the top center and moving outwards.

Step 3

• Remove the eight short screws holding in the two metal covers near the bottom.
• Remove the two metal covers.

Remove the eight short screws holding in the two metal covers near the bottom.

Remove the two metal covers.

Step 4

• Remove the battery to access the screws under it.
• Remove these 16 screws with a regular Phillips head screw-driver.
• These Phillips head screws will require a longer bit or an extension.

Remove the battery to access the screws under it.

Remove these 16 screws with a regular Phillips head screw-driver.

These Phillips head screws will require a longer bit or an extension.

Step 5

• Flip the device back over.
• Pull off the plastic cover behind the screen.
• Remove the four Phillips head screws holding the screen in place.

Flip the device back over.

Pull off the plastic cover behind the screen.

Remove the four Phillips head screws holding the screen in place.

Step 6

• With the screen removed, pry the piece that has the keyboard and the track pad on it.

With the screen removed, pry the piece that has the keyboard and the track pad on it.

Step 7

• Remove the two Phillips head screws holding the buttons in place.

Remove the two Phillips head screws holding the buttons in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Josh Reyes                     

Member since: 09/18/2018

183 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       University of North Texas, Team S3-G7, Raign Fall 2018                        

                                                  Member of University of North Texas, Team S3-G7, Raign Fall 2018 



                    UNT-RAIGN-F18S3G7                     


                                            3 Members                     


                                            4 Guides authored