Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes            

Sections

2

  • Back Plate
  • 3 steps
  • Hard Drive
  • 4 steps

Flags

0

  • BackAsus ROG G750JM-BSI7N23

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Plate               
  • With the computer upside down, lift up on the rubber cap on the back plate to access the captive Phillips #2 screw.

With the computer upside down, lift up on the rubber cap on the back plate to access the captive Phillips #2 screw.

1024

Step 2

  • Retract the Phillips #2 screw until the cover is loose.
  • The screw will not come all the way out.

Retract the Phillips #2 screw until the cover is loose.

The screw will not come all the way out.

Step 3

  • Pry around the edges of the plate using a plastic opening tool until the plate is removed.

Pry around the edges of the plate using a plastic opening tool until the plate is removed.

Step 4

              Hard Drive               
  • To access the hard drive, remove the back plate.

To access the hard drive, remove the back plate.

Step 5

  • Remove the three 4mm Phillips #2 screws.

Remove the three 4mm Phillips #2 screws.

Step 6

  • Pull back on the tab on the hard drive shield until it is clear of the screw slots. Next pull the shield out.

Pull back on the tab on the hard drive shield until it is clear of the screw slots. Next pull the shield out.

Step 7

  • With the hard drive exposed, pull the hard drive away from the connection point and then remove the hard drive.

With the hard drive exposed, pull the hard drive away from the connection point and then remove the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Tanner                     

Member since: 09/21/2018

892 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Central Washington University, Team S1-G6, Pengilly Fall 2018                        

                                                  Member of Central Washington University, Team S1-G6, Pengilly Fall 2018 



                    CWU-PENGILLY-F18S1G6                     


                                            3 Members                     


                                            5 Guides authored