Difficulty

Moderate

Steps

14

Time Required

Suggest a time??

Sections

1

  • keyboard (palmrest)
  • 14 steps

Flags

2

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackAsus ROG G750JS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              pull out battery
  • Flip the laptop
  • Unlock and pull out the battery

Flip the laptop

Unlock and pull out the battery

1024

Step 2

              unscrew back panel access
  • Locate and unscrew the screw under the rubber cover
  • pop out the plastic cover
  • unscrew 5 screws marked in the picture (keep the screws separated by length and color)

Locate and unscrew the screw under the rubber cover

pop out the plastic cover

unscrew 5 screws marked in the picture (keep the screws separated by length and color)

Step 3

              unscrew the outer screws
  • pop out the rubbers plugs (7) around the laptop
  • unscrew screws under the plugs

pop out the rubbers plugs (7) around the laptop

unscrew screws under the plugs

Step 4

              remove screws under battery
  • remove 5 screws from the battery panel

remove 5 screws from the battery panel

Step 5

              remove optical drive
  • If you have removed screw C in step 3 (pointed at in the picture) you can pull out the optical drive
  • remove all 3 screws revealed by removing the drive

If you have removed screw C in step 3 (pointed at in the picture) you can pull out the optical drive

remove all 3 screws revealed by removing the drive

Step 6

              remove speakers
  • flip laptop
  • pop open the speaker part
  • unplug speakers
  • remove 1 black screw on both sides

flip laptop

pop open the speaker part

unplug speakers

remove 1 black screw on both sides

Step 7

              pop out the front plate
  • using a plastic prying tool separate the front plate(keyboard) from the rest of the laptop

using a plastic prying tool separate the front plate(keyboard) from the rest of the laptop

Step 8

              detach the keyboard
  • gently lift the front plate
  • detach all four ribbons connecting the front plate to the motherboard
  • keep the light colored ribbon (it can be detached from the front plate as well)

gently lift the front plate

detach all four ribbons connecting the front plate to the motherboard

keep the light colored ribbon (it can be detached from the front plate as well)

Step 9

              connect and push in the new part
  • connect the new front plate in the same spots as the old one
  • if needed reconnect the light colored ribbon on both the front plate and the motherboard
  • push the new plate back in place, make sure all sides are in

connect the new front plate in the same spots as the old one

if needed reconnect the light colored ribbon on both the front plate and the motherboard

push the new plate back in place, make sure all sides are in

Step 10

              put back the black screws
  • put back the black screws holding the front plate

put back the black screws holding the front plate

Step 11

              reconnect and close the speaker panel
  • reconnect the speakers
  • push in place the whole speaker panel

reconnect the speakers

push in place the whole speaker panel

Step 12

              put back the optical drive
  • screw back the 3 screws in the optical drive slot
  • slide in the drive
  • secure with screw C (circled in second picture)

screw back the 3 screws in the optical drive slot

slide in the drive

secure with screw C (circled in second picture)

Step 13

              return back panel
  • put in place all screws in the back panel
  • the screw on the very left is the longest
  • push back in the plastic cover
  • return the silver screw covered by the rubber cover

put in place all screws in the back panel

the screw on the very left is the longest

push back in the plastic cover

return the silver screw covered by the rubber cover

Step 14

              put back in the battery
  • screw in the last 5 screws in the battery panel
  • push back in the battery
  • done!

screw in the last 5 screws in the battery panel

push back in the battery

done!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    hornikmartinrepair

Member since: 07/06/2016

333 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Anthony Massmann - Aug 30, 2019

Reply

what does the light ribbon do?

hornikmartinrepair - Sep 1, 2019

Reply

@Anthony+Massmann I don’t remember exactly. It’s most likely for the touch pad considering it’s location.