Asus Rog G751Jl Bsi7T28 Display Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Back Panel
2 steps
Display Assembly
5 steps

Flags

BackAsus ROG G751JL-BSI7T28
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This guide is helpful to those who wish to replace their display if it was broken or damaged. Symptoms of a broken display can range from a cracked or shattered display, patches of multicolored dots, one or more lines of discoloration, or a screen with rainbow colors.

The display is an LCD screen that has a size of 17.3”.

Detailed photos will accompany each step to provide a visual to assist in the disassembly of your laptop.

Warning: Ensure your device is powered down before starting this guide to prevent any electrical injuries or damage to your computer.

What you need

Step 1

              Back Panel

With the laptop closed, turn it upside-down so the bottom is facing up toward you.

With the laptop closed, turn it upside-down so the bottom is facing up toward you.

1024

Step 2

Place a spudger into the notch, and pry the small triangular piece away from the laptop.
Using a Phillips #00 screwdriver, remove the single 3 mm screw.
Place a spudger beneath the back panel and pry it away from the laptop.

Place a spudger into the notch, and pry the small triangular piece away from the laptop.

Using a Phillips #00 screwdriver, remove the single 3 mm screw.

Place a spudger beneath the back panel and pry it away from the laptop.

Step 3

              Display Assembly

Remove all 5mm Phillips #00 screws from the back cover.

Remove all 5mm Phillips #00 screws from the back cover.

Step 4

Use a spudger to pry the disc drive out of the laptop.

Use a spudger to pry the disc drive out of the laptop.

Step 5

Open the laptop and turn it so that the ASUS logo is facing you.
Gently lift up the display hinge housing shroud, but don’t pull it completely away yet.
Disconnect the RGB light power cable in the shroud, now the shroud can be put aside.

Open the laptop and turn it so that the ASUS logo is facing you.

Gently lift up the display hinge housing shroud, but don’t pull it completely away yet.

Disconnect the RGB light power cable in the shroud, now the shroud can be put aside.

Step 6

Remove the 5mm Phillips #00 screws.
Lift up the silver hinge brackets on each side of the laptop.

Remove the 5mm Phillips #00 screws.

Lift up the silver hinge brackets on each side of the laptop.

Step 7

Remove the 5mm Phillips #00 screws from the hinges.
Detach the ribbon cable and remove the display assembly from the laptop.

Remove the 5mm Phillips #00 screws from the hinges.

Detach the ribbon cable and remove the display assembly from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Kristen Gismondi

Member since: 11/12/2014

69,395 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team