Difficulty

Moderate

Steps

10

Time Required

                          15 - 35 minutes

Sections

4

  • Back Panel
  • 2 steps
  • Display Assembly
  • 5 steps
  • Keyboard Assembly
  • 1 step
  • Fan
  • 2 steps

Flags

0

  • BackAsus ROG G751JL-BSI7T28

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This guide is compatible with the following ASUS models: G751, G751J, G751JM, G751JT, G751JL, and G751JY.

Before beginning, make sure to power off your device before starting this guide to prevent any electrical injuries or damage to your computer.

What you need

Step 1

              Back Panel
  • With the laptop closed, turn it upside-down so the bottom is facing up toward you.

With the laptop closed, turn it upside-down so the bottom is facing up toward you.

1024

Step 2

  • Place a spudger into the notch, and pry the small triangular piece away from the laptop.
  • Using a Phillips #00 screwdriver, remove the single 3 mm screw.
  • Place a spudger beneath the back panel and pry it away from the laptop.

Place a spudger into the notch, and pry the small triangular piece away from the laptop.

Using a Phillips #00 screwdriver, remove the single 3 mm screw.

Place a spudger beneath the back panel and pry it away from the laptop.

Step 3

              Display Assembly
  • Remove all 5mm Phillips #00 screws from the back cover.

Remove all 5mm Phillips #00 screws from the back cover.

Step 4

  • Use a spudger to pry the disc drive out of the laptop.

Use a spudger to pry the disc drive out of the laptop.

Step 5

  • Open the laptop and turn it so that the ASUS logo is facing you.
  • Gently lift up the display hinge housing shroud, but don’t pull it completely away yet.
  • Disconnect the RGB light power cable in the shroud, now the shroud can be put aside.

Open the laptop and turn it so that the ASUS logo is facing you.

Gently lift up the display hinge housing shroud, but don’t pull it completely away yet.

Disconnect the RGB light power cable in the shroud, now the shroud can be put aside.

Step 6

  • Remove the 5mm Phillips #00 screws.
  • Lift up the silver hinge brackets on each side of the laptop.

Remove the 5mm Phillips #00 screws.

Lift up the silver hinge brackets on each side of the laptop.

Step 7

  • Remove the 5mm Phillips #00 screws from the hinges.
  • Detach the ribbon cable and remove the display assembly from the laptop.

Remove the 5mm Phillips #00 screws from the hinges.

Detach the ribbon cable and remove the display assembly from the laptop.

Step 8

              Keyboard Assembly
  • Carefully lift the keyboard up, being careful to not damage the fragile ribbon connectors.
  • Use an opening tool to detach the ribbon cables connecting the keyboard to the rest of the laptop.
  • Remove the keyboard from the laptop.

Carefully lift the keyboard up, being careful to not damage the fragile ribbon connectors.

Use an opening tool to detach the ribbon cables connecting the keyboard to the rest of the laptop.

Remove the keyboard from the laptop.

Step 9

              Fan
  • Remove the fan’s power cable by pulling carefully outward towards the fan.

Remove the fan’s power cable by pulling carefully outward towards the fan.

Step 10

  • Remove the 5mm Phillips #00 screw.
  • Pull up on the black tab connected to the fan. This will pull it away from the cooling fins, allowing it to be removed.
  • Remove the fan from the laptop.

Remove the 5mm Phillips #00 screw.

Pull up on the black tab connected to the fan. This will pull it away from the cooling fins, allowing it to be removed.

Remove the fan from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Kristen Gismondi

Member since: 11/12/2014

69,395 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored

Andres Landazuri - Apr 3, 2022

Reply

What’s the fan model?