Difficulty
Moderate
Steps
3
Time Required
15 minutes
Sections
1
- Hard Drive
- 3 steps
Flags
0
BackAsus ROG G751JL-DS71
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Lift the rubber cover found on the bottom of the laptop.
- Remove the 5.2 mm screw with a Phillips 1 Screwdriver.
Lift the rubber cover found on the bottom of the laptop.
Remove the 5.2 mm screw with a Phillips 1 Screwdriver.
1024
Step 2
- Use the black nylon spudger to pry the back panel off the laptop.
Use the black nylon spudger to pry the back panel off the laptop.
Step 3
- Use a Phillips 1 Screwdriver to remove the four 2.4 mm screws securing the hard drive.
- Use the black pull-tab located on the shell covering the hard drive, to lift the hard drive housing and pull the hard drive away from the connector.
- To access the hard drive on the right side of the laptop, perform the same steps, but on hard drive casing to the right of the previous hard drive.
Use a Phillips 1 Screwdriver to remove the four 2.4 mm screws securing the hard drive.
Use the black pull-tab located on the shell covering the hard drive, to lift the hard drive housing and pull the hard drive away from the connector.
To access the hard drive on the right side of the laptop, perform the same steps, but on hard drive casing to the right of the previous hard drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Vincent Guarino
Member since: 01/22/2018
190 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
Cal Poly, Team S16-G1, Banghart Winter 2018
Member of Cal Poly, Team S16-G1, Banghart Winter 2018
CPSU-BANGHART-W18S16G1
4 Members
22 Guides authored
