Difficulty
Moderate
Steps
4
Time Required
15 minutes
Sections
1
- HDD/SSD
- 4 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackAsus ROG G751JT-DH72
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
HDD/SSD
- Lift up the rubber tab located in the upper-right corner of the backing plate.
Lift up the rubber tab located in the upper-right corner of the backing plate.
1024
Step 2
- Use a Phillips #1 screwdriver to remove the 5.2 mm screw behind the rubber tap.
Use a Phillips #1 screwdriver to remove the 5.2 mm screw behind the rubber tap.
Step 3
- Carefully pull the backing plate off. If you have a pry tool, you can pry on the edges carefully.
Carefully pull the backing plate off. If you have a pry tool, you can pry on the edges carefully.
Step 4
- Use a Phillips head screwdriver to remove the four 2.4 mm screws from the hard drive mount.
- Remove the hard drive from the device.
Use a Phillips head screwdriver to remove the four 2.4 mm screws from the hard drive mount.
Remove the hard drive from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Anum Haidari
Member since: 10/22/2018
558 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
UC Davis, Team S7-G4, Lore Fall 2018
Member of UC Davis, Team S7-G4, Lore Fall 2018
UCD-LORE-F18S7G4
2 Members
3 Guides authored