Difficulty
Easy
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Switch
- 5 steps
Flags
4
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
BackMouse
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Switch
- Make sure the mouse is powered off.
- If the green is visible like in the first photo, turn the switch to fully power down the device.
Make sure the mouse is powered off.
If the green is visible like in the first photo, turn the switch to fully power down the device.
1024
Step 2
- Remove the screw covers.
Remove the screw covers.
Step 3
- Using a Torx T10 driver, remove the four screws from the device.
Using a Torx T10 driver, remove the four screws from the device.
Step 4
- Flip the mouse over and remove the top plastic casing.
Flip the mouse over and remove the top plastic casing.
Step 5
- After locating which switch you need to replace, grab the switch by the top and the bottom and carefully pull it out of the device.
After locating which switch you need to replace, grab the switch by the top and the bottom and carefully pull it out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Suhaib Rahman
Member since: 09/19/2020
398 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
York University, Team S1-G25, Melo-Thaiss Summer 2021
Member of York University, Team S1-G25, Melo-Thaiss Summer 2021
YORK-MELO-THAISS-SU21S1G25
1 Member
6 Guides authored