Asus Rog Strix Gl702Vm Bhi7N09 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Back Panel
2 steps
Battery
2 steps

Flags

BackAsus ROG Strix GL702VM-BHI7N09
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

The battery enables the laptop to be used without its charger cord. Battery failure prevents the laptop from functioning without its charger. Replacing the battery will restore this capability.

No advanced skills are needed for this procedure.

What you need

Step 1

              Back Panel

Flip the laptop over to the back panel, with the serial numbers facing up.
Using a Phillips #1 screwdriver, remove the ten 12 mm screws from the back panel.

Flip the laptop over to the back panel, with the serial numbers facing up.

Using a Phillips #1 screwdriver, remove the ten 12 mm screws from the back panel.

1024

Step 2

The snap seals don’t need a lot of pressure to open, and may break if forced. Be gentle with the opening tool.
Wedge the sharp edge of the plastic opening tool into the seam between the back panel and the rest of the laptop, then gently pry the panel up.
There will be a snapping sound as you remove the back panel, but that is just the seal loosening.
Continue breaking the seals by sliding the plastic opening tool around the entire laptop under the seam until the back panel is free.
Once you have broken all the seals, carefully lift the panel off.

The snap seals don’t need a lot of pressure to open, and may break if forced. Be gentle with the opening tool.

Wedge the sharp edge of the plastic opening tool into the seam between the back panel and the rest of the laptop, then gently pry the panel up.

There will be a snapping sound as you remove the back panel, but that is just the seal loosening.

Continue breaking the seals by sliding the plastic opening tool around the entire laptop under the seam until the back panel is free.

Once you have broken all the seals, carefully lift the panel off.

Step 3

              Battery

Unplug the battery from the motherboard.

Unplug the battery from the motherboard.

Step 4

Unscrew the 3.8 mm Phillips #1 screw on the top right hand corner of the battery.
Lift battery from laptop frame.

Unscrew the 3.8 mm Phillips #1 screw on the top right hand corner of the battery.

Lift battery from laptop frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 5 other contributors

                    Gunnar Hudson

Member since: 11/04/2019

248 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Idaho State University, Team S1-G5, Watkins Fall 2019                        

                                                  Member of Idaho State University, Team S1-G5, Watkins Fall 2019 



                    ISU-WATKINS-F19S1G5                     


                                            4 Members                     


                                            2 Guides authored

Collin MacQuarrie - Sep 17, 2021

Cheers mate! Worked like a %#*@. Built lots of PCs in my time but this is the first time I’ve taken a laptop apart. I should mention: there are 4 screws holding the battery in rather than the 1 you mention in this guide.

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team