Difficulty

Moderate

Steps

7

Time Required

                          15 minutes - 1 hour

Sections

2

  • Back Cover
  • 4 steps
  • Cooling Fans
  • 3 steps

Flags

0

  • BackAsus ROG Strix GL702VS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Flip the computer so the bottom of the laptop is facing up.

Flip the computer so the bottom of the laptop is facing up.

1024

Step 2

  • Remove the ten JIS #0 screws around the edge of the laptop.

Remove the ten JIS #0 screws around the edge of the laptop.

Step 3

  • Use a Jimmy to carefully free each side of the bottom casing.

Use a Jimmy to carefully free each side of the bottom casing.

Step 4

  • Lift up the back casing from the computer.
  • You may hear clicking or snapping sounds. This is just the plastic clips coming loose.

Lift up the back casing from the computer.

You may hear clicking or snapping sounds. This is just the plastic clips coming loose.

Step 5

              Cooling Fans
  • Remove the four 4.8mm JIS #0 screws (two on each fan).

Remove the four 4.8mm JIS #0 screws (two on each fan).

Step 6

  • Remove the fan’s connector on the motherboard using a pair of tweezers.
  • Be gentle, as the small clips and wires can be easily damaged.

Remove the fan’s connector on the motherboard using a pair of tweezers.

Be gentle, as the small clips and wires can be easily damaged.

Step 7

  • Gently lift each fan up and out of position.

Gently lift each fan up and out of position.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Conor H Allen

Member since: 09/16/2019

595 Reputation

                                      5 Guides authored                  



                       Badges:
                       8





                                                        +5 more badges

Team

                       Embry-Riddle Aeronautical University, Team S8-G6, Salas Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S8-G6, Salas Fall 2019 



                    ERAU-SALAS-F19S8G6                     


                                            4 Members                     


                                            7 Guides authored