Difficulty

Moderate

Steps

8

Time Required

                          10 - 30 minutes

Sections

2

  • LCD Screen (Display)
  • 6 steps
  • Webcam
  • 2 steps

Flags

0

  • BackAsus ROG Strix GL702VS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen (Display)
  • Remove the two screw stickers at the bottom corners of the screen.
  • Remove the two 4mm JIS #0 screws beneath the stickers.

Remove the two screw stickers at the bottom corners of the screen.

Remove the two 4mm JIS #0 screws beneath the stickers.

1024

Step 2

  • Break the glue between the bezel and screen with a nylon spudger, working around the inside of the bezel.
  • Using an opening tool, lift up the bezel once the glue has been removed.
  • The plastic clips remain so it will have some resistance/snapping noises.

Break the glue between the bezel and screen with a nylon spudger, working around the inside of the bezel.

Using an opening tool, lift up the bezel once the glue has been removed.

The plastic clips remain so it will have some resistance/snapping noises.

Step 3

  • Lift the plastic bezel off of the front display panel.
  • The plastic bezel will click when put back on the screen.

Lift the plastic bezel off of the front display panel.

The plastic bezel will click when put back on the screen.

Step 4

  • Remove the four interior 4mm JIS #0 screws from each of the four metal LCD tabs.

Remove the four interior 4mm JIS #0 screws from each of the four metal LCD tabs.

Step 5

  • Once the LCD display is freed you can lift it up out of the casing.
  • Be careful as the cable remains attached.

Once the LCD display is freed you can lift it up out of the casing.

Be careful as the cable remains attached.

Step 6

  • On the backside of the LCD, disconnect the LCD cable using a pair of tweezers.
  • Once fully disconnected, remove the LCD and replace it.

On the backside of the LCD, disconnect the LCD cable using a pair of tweezers.

Once fully disconnected, remove the LCD and replace it.

Step 7

              Webcam
  • Gently lift the webcam out of its resting position at the top of the LCD assembly.

Gently lift the webcam out of its resting position at the top of the LCD assembly.

Step 8

  • Using the nylon tweezers or your hand, disconnect the webcam module.

Using the nylon tweezers or your hand, disconnect the webcam module.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Alexander M. Lanyi

Member since: 09/16/2019

98 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Embry-Riddle Aeronautical University, Team S8-G6, Salas Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S8-G6, Salas Fall 2019 



                    ERAU-SALAS-F19S8G6                     


                                            4 Members                     


                                            7 Guides authored