Difficulty

Easy

Steps

6

Time Required

                          10 - 25 minutes

Sections

1

  • RAM
  • 6 steps

Flags

0

  • BackAsus ROG Zephyrus G14

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              RAM
  • Make sure to power off your laptop and unplug all accessories when disassembling to avoid damage.
  • Place the laptop so the backplate faces up.

Make sure to power off your laptop and unplug all accessories when disassembling to avoid damage.

Place the laptop so the backplate faces up.

1024

Step 2

  • Remove the screws on the back. Unscrew them with a Phillips #0 screwdriver.
  • Remove the three (2x4.5mm) screws from the front of the laptop.
  • Remove the ten (2x9mm) screws from the middle and back of the laptop.
  • Unscrew the (2x6mm) captive screw in the bottom right without removing it.

Remove the screws on the back. Unscrew them with a Phillips #0 screwdriver.

Remove the three (2x4.5mm) screws from the front of the laptop.

Remove the ten (2x9mm) screws from the middle and back of the laptop.

Unscrew the (2x6mm) captive screw in the bottom right without removing it.

Step 3

  • Turn the computer around and pull up on the backplate to remove it.

Turn the computer around and pull up on the backplate to remove it.

Step 4

  • Rotate the laptop around so the battery is facing towards you.
  • Pull back on the black plastic that covers the RAM slot.

Rotate the laptop around so the battery is facing towards you.

Pull back on the black plastic that covers the RAM slot.

Step 5

  • If there is a RAM stick currently in the laptop, pull the tabs on the left and right to allow the RAM to pop up.

If there is a RAM stick currently in the laptop, pull the tabs on the left and right to allow the RAM to pop up.

Step 6

  • Align and insert the RAM into the slot and push it down.
  • Once the RAM clicks into place, check to make sure that the RAM is locked in place.

Align and insert the RAM into the slot and push it down.

Once the RAM clicks into place, check to make sure that the RAM is locked in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jacob Miller

Member since: 02/02/2021

244 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Embry-Riddle Aeronautical University, Team S7-G7, Rauch Spring 2021                        

                                                  Member of Embry-Riddle Aeronautical University, Team S7-G7, Rauch Spring 2021 



                    ERAU-RAUCH-S21S7G7                     


                                            1 Member                     


                                            2 Guides authored

Andy Merskin - Oct 14, 2021

Reply

Something that might be helpful for this guide is including the RAM specifications needed for an upgrade if people are looking for information on what to buy.

Otherwise, great guide!