Difficulty
Moderate
Steps
3
Time Required
5 - 10 minutes
Sections
1
- RAM
- 3 steps
Flags
0
BackAsus ROG ZX50VW-BH17N10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Remove the 16 mm and 9 mm screws on the small panel on the bottom of the laptop using the Phillips #1 screwdriver.
Remove the 16 mm and 9 mm screws on the small panel on the bottom of the laptop using the Phillips #1 screwdriver.
1024
Step 2
- Insert the metal spudger into the lip of the back panel and gently pry it off.
Insert the metal spudger into the lip of the back panel and gently pry it off.
Step 3
- Use your fingers or plastic spudger to unlatch the two metal clips on either side of the RAM. It will then pop up to a 35 degree angle for removal.
- Using a metal spudger may severely damage the internal components of your device.
Use your fingers or plastic spudger to unlatch the two metal clips on either side of the RAM. It will then pop up to a 35 degree angle for removal.
Using a metal spudger may severely damage the internal components of your device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Naomi Rodriguez
Member since: 09/17/2019
747 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
Embry-Riddle Aeronautical University, Team S15-G3, Lamothe Fall 2019
Member of Embry-Riddle Aeronautical University, Team S15-G3, Lamothe Fall 2019
ERAU-LAMOTHE-F19S15G3
4 Members
5 Guides authored
