Difficulty

Moderate

Steps

7

Time Required

                          15 - 25 minutes

Sections

3

  • Back Panel
  • 3 steps
  • Battery
  • 2 steps
  • Microphone
  • 2 steps

Flags

0

  • BackAsus MeMO Pad 7 ME7000C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Flip over the tablet so the back cover is facing you. Hold the second button on the left below the volume buttons down until it powers off.

Flip over the tablet so the back cover is facing you. Hold the second button on the left below the volume buttons down until it powers off.

1024

Step 2

  • Beginning in the upper corner of the tablet, use the blue plastic opening tool and run it along the seam. Do this slowly so you don’t cause damage to the device.
  • If you are having trouble using the blue plastic opening tools, try using the black spudger instead.

Beginning in the upper corner of the tablet, use the blue plastic opening tool and run it along the seam. Do this slowly so you don’t cause damage to the device.

If you are having trouble using the blue plastic opening tools, try using the black spudger instead.

Step 3

  • Pull the rear panel and the display screen away from each other.

Pull the rear panel and the display screen away from each other.

Step 4

              Battery
  • Using the spudger, gently press on the black button on the plug port to release the battery from the plug.

Using the spudger, gently press on the black button on the plug port to release the battery from the plug.

Step 5

  • Remove the battery from the device.

Remove the battery from the device.

Step 6

              Microphone
  • Disconnect the microphone plug from the motherboard.
  • Use the tweezers to gently pull the white plug from the motherboard.

Disconnect the microphone plug from the motherboard.

Use the tweezers to gently pull the white plug from the motherboard.

Step 7

  • Using the tweezers, peel back the silver adhesive, exposing the microphone.
  • Make sure you leave the tape adhered to the device for reassembly.
  • Gently remove the microphone with tweezers.

Using the tweezers, peel back the silver adhesive, exposing the microphone.

Make sure you leave the tape adhered to the device for reassembly.

Gently remove the microphone with tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Katie

Member since: 04/10/2018

714 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team S2-G1, Ramos Spring 2018                        

                                                  Member of Eastern Washington University, Team S2-G1, Ramos Spring 2018 



                    EWU-RAMOS-S18S2G1                     


                                            4 Members                     


                                            12 Guides authored