Difficulty
Moderate
Steps
17
Time Required
25 - 30 minutes
Sections
5
- Back Panel
- 3 steps
- Battery
- 2 steps
- Speaker
- 3 steps
- Motherboard
- 7 steps
- Rear Camera
- 2 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackAsus MeMO Pad 7 ME7000C
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Flip over the tablet so the back cover is facing you. Hold the second button on the left below the volume buttons down until it powers off.
Flip over the tablet so the back cover is facing you. Hold the second button on the left below the volume buttons down until it powers off.
1024
Step 2
- Beginning in the upper corner of the tablet, use the blue plastic opening tool and run it along the seam. Do this slowly so you don’t cause damage to the device.
- If you are having trouble using the blue plastic opening tools, try using the black spudger instead.
Beginning in the upper corner of the tablet, use the blue plastic opening tool and run it along the seam. Do this slowly so you don’t cause damage to the device.
If you are having trouble using the blue plastic opening tools, try using the black spudger instead.
Step 3
- Pull the rear panel and the display screen away from each other.
Pull the rear panel and the display screen away from each other.
Step 4
Battery
- Using the spudger, gently press on the black button on the plug port to release the battery from the plug.
Using the spudger, gently press on the black button on the plug port to release the battery from the plug.
Step 5
- Remove the battery from the device.
Remove the battery from the device.
Step 6
Speaker
- Using the tweezers, disconnect the black clip.
Using the tweezers, disconnect the black clip.
Step 7
- Use the Phillips #000 Screwdriver to unscrew the 3mm Phillips head screws on the right and left corners of the speaker.
- Use the magnetic pad to keep track of your screws while working.
Use the Phillips #000 Screwdriver to unscrew the 3mm Phillips head screws on the right and left corners of the speaker.
Use the magnetic pad to keep track of your screws while working.
Step 8
- Remove the speaker from the device.
Remove the speaker from the device.
Step 9
Motherboard
- Gently unplug the microphone from the motherboard using a pair of blunt tweezers.
Gently unplug the microphone from the motherboard using a pair of blunt tweezers.
Step 10
- Flip the cream tab above the blue ribbon up with the pair of tweezers to release the ribbon.
- Using the blue tab, gently pull the ribbon away from the motherboard.
Flip the cream tab above the blue ribbon up with the pair of tweezers to release the ribbon.
Using the blue tab, gently pull the ribbon away from the motherboard.
Step 11
- Using the tweezers, flip back the black tab to release the volume ribbon.
- Once released, gently pull ribbon away from motherboard using the tweezers.
Using the tweezers, flip back the black tab to release the volume ribbon.
Once released, gently pull ribbon away from motherboard using the tweezers.
Step 12
- Pull back the silver adhesive with tweezers.
- Gently use the tweezers to flip up the black release tabs on the gold ribbons.
Pull back the silver adhesive with tweezers.
Gently use the tweezers to flip up the black release tabs on the gold ribbons.
Step 13
- Once the black tabs are lifted, use the spudger to pull the gold tabs away from the motherboard.
Once the black tabs are lifted, use the spudger to pull the gold tabs away from the motherboard.
Step 14
- Using the Phillips #000 screwdriver unscrew the four 3mm screws.
- Use the magnetic board to keep track of your screws.
Using the Phillips #000 screwdriver unscrew the four 3mm screws.
Use the magnetic board to keep track of your screws.
Step 15
- Hold both sides of the motherboard and gently lift up to remove the motherboard from the device.
- If you feel tension or the motherboard is not coming off properly, make sure all the connections have been disconnected properly.
Hold both sides of the motherboard and gently lift up to remove the motherboard from the device.
If you feel tension or the motherboard is not coming off properly, make sure all the connections have been disconnected properly.
Step 16
Rear Camera
- Using the tweezers flip the cream tab up to release the camera ribbon.
- Gently lift the silver adhesive to remove the camera ribbon from motherboard.
- Pull the silver tape away from camera.
Using the tweezers flip the cream tab up to release the camera ribbon.
Gently lift the silver adhesive to remove the camera ribbon from motherboard.
Pull the silver tape away from camera.
Step 17
- Make sure you leave the tape attached to the motherboard as you will need it to fix the new camera.
Make sure you leave the tape attached to the motherboard as you will need it to fix the new camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Katie
Member since: 04/10/2018
714 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team S2-G1, Ramos Spring 2018
Member of Eastern Washington University, Team S2-G1, Ramos Spring 2018
EWU-RAMOS-S18S2G1
4 Members
12 Guides authored
