Difficulty

Moderate

Steps

4

Time Required

                          10 - 20 minutes            

Sections

1

  • Front Facing Camera
  • 4 steps

Flags

0

  • BackAsus Transformer Pad TF300T Tablet

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Facing Camera               
  • Disconnect the dock and make sure the power is turned off.
  • Use plastic opening tool to pry screen up and remove the main tablet body from outer rim casing.
  • Be gentle with the plastic opening tool near charging port. The thinner plastic may break easily.

Disconnect the dock and make sure the power is turned off.

Use plastic opening tool to pry screen up and remove the main tablet body from outer rim casing.

Be gentle with the plastic opening tool near charging port. The thinner plastic may break easily.

1024

Step 2

  • Pull up on the black circuit board protector.
  • Turn off the hard power switch before working with the tablet. Use plastic tool to slide the switch to the position marked “off”.
  • For most of the replacement operation, you do not have to remove the battery once you turned off the switch. Make sure that you do not short anything with the metal tools.

Pull up on the black circuit board protector.

Turn off the hard power switch before working with the tablet. Use plastic tool to slide the switch to the position marked “off”.

For most of the replacement operation, you do not have to remove the battery once you turned off the switch. Make sure that you do not short anything with the metal tools.

Step 3

  • Use a Phillips #00 Screwdriver to remove the six 3mm screws that connect the upper part of the motherboard.
  • Use tweezers to remove red connecting wires. Remove the motherboard by lifting it upward.

Use a Phillips #00 Screwdriver to remove the six 3mm screws that connect the upper part of the motherboard.

Use tweezers to remove red connecting wires. Remove the motherboard by lifting it upward.

Step 4

  • Use tweezers to pull out the gold flap connected to the front camera.
  • Pull the disconnected gold flap to take out the camera.

Use tweezers to pull out the gold flap connected to the front camera.

Pull the disconnected gold flap to take out the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Emma Sloan                     

Member since: 05/17/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S2-G2, Wilson Summer 2017                        

                                                  Member of IUPUI, Team S2-G2, Wilson Summer 2017 



                    IUPUI-WILSON-SU17S2G2                     


                                            3 Members                     


                                            8 Guides authored