Asus Tf300T Tablet Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

Speaker
4 steps

Flags

BackAsus Transformer Pad TF300T Tablet
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker

Disconnect the dock and make sure the power is turned off.
Use plastic opening tool to pry screen up and remove from outer casing.
Be gentle with the plastic opening tool when you reach the charging port as the thinner plastic could be broken easily.

Disconnect the dock and make sure the power is turned off.

Use plastic opening tool to pry screen up and remove from outer casing.

Be gentle with the plastic opening tool when you reach the charging port as the thinner plastic could be broken easily.

1024

Step 2

Pull up on the black circuit board protector.
Turn off the hard power switch before working with the tablet. Use a tool to slide the switch to the position marked “off”.
For most of the replacement operation, you do not have to remove the battery once you turned off the switch. Make sure that you do not short anything with the metal tools.

Pull up on the black circuit board protector.

Turn off the hard power switch before working with the tablet. Use a tool to slide the switch to the position marked “off”.

For most of the replacement operation, you do not have to remove the battery once you turned off the switch. Make sure that you do not short anything with the metal tools.

Step 3

Use a Phillips #00 screwdriver to remove the 3mm screws connecting the battery to the motherboard.
Use the same screwdriver to remove two 3mm screws connecting the clips.
Use tweezers to remove two wires connected from the battery to the motherboard.
Use the spudger to remove he battery from the case.

Use a Phillips #00 screwdriver to remove the 3mm screws connecting the battery to the motherboard.

Use the same screwdriver to remove two 3mm screws connecting the clips.

Use tweezers to remove two wires connected from the battery to the motherboard.

Use the spudger to remove he battery from the case.

Step 4

Use the tweezers to remove the speaker unit from its clip by pulling on the white plug.
Use a Phillips #00 Screwdriver to remove all of the 3mm screws that is connected with the speaker.
Use plastic opening tool to take out the speaker.

Use the tweezers to remove the speaker unit from its clip by pulling on the white plug.

Use a Phillips #00 Screwdriver to remove all of the 3mm screws that is connected with the speaker.

Use plastic opening tool to take out the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Khairuz Zaki Md Rujhan

Member since: 05/22/2017

437 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       IUPUI, Team S2-G2, Wilson Summer 2017                        

                                                  Member of IUPUI, Team S2-G2, Wilson Summer 2017 



                    IUPUI-WILSON-SU17S2G2                     


                                            3 Members                     


                                            8 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team