Difficulty

Easy

Steps

6

Time Required

                          10 minutes

Sections

2

  • Back Case
  • 2 steps
  • Battery
  • 4 steps

Flags

0

  • BackASUS Transformer Book Flip TP500LA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • Remove the ten 10 mm Phillips #0 screws found on the computer’s back case.

Remove the ten 10 mm Phillips #0 screws found on the computer’s back case.

1024

Step 2

  • Slide a heavy-duty spudger between the back case and the computer.
  • Slowly work around the edges to undo the clips to fully separate the back case from the computer.
  • Gently lift off the back case.

Slide a heavy-duty spudger between the back case and the computer.

Slowly work around the edges to undo the clips to fully separate the back case from the computer.

Gently lift off the back case.

Step 3

              Battery
  • Slide a heavy-duty spudger into the ZIF connector and gently flip up the retaining flap to open the connector.
  • Pull the blue tab to remove the ribbon.

Slide a heavy-duty spudger into the ZIF connector and gently flip up the retaining flap to open the connector.

Pull the blue tab to remove the ribbon.

Step 4

  • Remove the three 5 mm Phillips #0 screws.
  • Remove the single 6 mm Phillips #0 screw.

Remove the three 5 mm Phillips #0 screws.

Remove the single 6 mm Phillips #0 screw.

Step 5

  • Use the heavy-duty spudger to pry the white 8-pin connector away from the motherboard.
  • Gently pull the connector away from the motherboard.
  • The black 8-pin connector on the motherboard is very fragile, so be careful when removing the white 8-pin connector.

Use the heavy-duty spudger to pry the white 8-pin connector away from the motherboard.

Gently pull the connector away from the motherboard.

The black 8-pin connector on the motherboard is very fragile, so be careful when removing the white 8-pin connector.

Step 6

  • Use the blue plastic opening tool to loosen and remove the three black wires from the battery.
  • Slide the battery out from the computer to remove.

Use the blue plastic opening tool to loosen and remove the three black wires from the battery.

Slide the battery out from the computer to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      14 other people completed this guide.

Author

                                      with 2 other contributors 


                    Garrett Fitzpatrick

Member since: 04/10/2017

801 Reputation

                                      2 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       Cal Poly, Team S13-G5, Forte Spring 2017                        

                                                  Member of Cal Poly, Team S13-G5, Forte Spring 2017 



                    CPSU-FORTE-S17S13G5                     


                                            4 Members                     


                                            6 Guides authored