Difficulty

Moderate

Steps

12

Time Required

                          20 - 30 minutes

Sections

1

  • Keyboard
  • 12 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackAsus Transformer Book T100TAF

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Detach the keyboard from the screen by depressing the silver button on the hinge and pulling upwards on the tablet.

Detach the keyboard from the screen by depressing the silver button on the hinge and pulling upwards on the tablet.

1024

Step 2

  • Remove the six 4 mm Phillips screws on the underside of the device. Do this using a Philips head screw driver.

Remove the six 4 mm Phillips screws on the underside of the device. Do this using a Philips head screw driver.

Step 3

  • Use a metal spudger to pry up the rubber pads covering the two upper silver screws.
  • Remove the two 5.5mm Phillips head screws with the PH00 screwdriver.

Use a metal spudger to pry up the rubber pads covering the two upper silver screws.

Remove the two 5.5mm Phillips head screws with the PH00 screwdriver.

Step 4

  • Remove the back cover and unscrew all the screws from the metal, inside pane. Include four black M2.5X4 Phillips head screws along the top, four black M2X3 Phillips head screws along the bottom.
  • Remove the one silver M2X5 Phillips screw in the top right corner.

Remove the back cover and unscrew all the screws from the metal, inside pane. Include four black M2.5X4 Phillips head screws along the top, four black M2X3 Phillips head screws along the bottom.

Remove the one silver M2X5 Phillips screw in the top right corner.

Step 5

  • Grab the metal keyboard cover and flip it down and out of the device.

Grab the metal keyboard cover and flip it down and out of the device.

Step 6

  • Remove the silver 4.5mm Phillips head screw on the keyboard circuit board.

Remove the silver 4.5mm Phillips head screw on the keyboard circuit board.

Step 7

  • Peel the yellow tape and label away from the motherboard with the metal spudger.

Peel the yellow tape and label away from the motherboard with the metal spudger.

Step 8

  • Unplug the cable which leads to the hinge by gently pulling it away from the motherboard.

Unplug the cable which leads to the hinge by gently pulling it away from the motherboard.

Step 9

  • Flip up the tab on the white ribbon cable labeled “MB” using the metal spudger and then pull the white ribbon cable away from the motherboard.
  • Carefully flip up the black tab on the ZIF connector and pull the black striped ribbon cable away from the motherboard.

Flip up the tab on the white ribbon cable labeled “MB” using the metal spudger and then pull the white ribbon cable away from the motherboard.

Carefully flip up the black tab on the ZIF connector and pull the black striped ribbon cable away from the motherboard.

Step 10

  • Gently remove the motherboard from the keyboard. Do this by pulling up on Green motherboard with even pressure applied to all sides.

Gently remove the motherboard from the keyboard. Do this by pulling up on Green motherboard with even pressure applied to all sides.

Step 11

  • Unscrew the three black 2mm Phillips head screws from the track pad.
  • Lift the track pad away from the device by pulling from the top edge.

Unscrew the three black 2mm Phillips head screws from the track pad.

Lift the track pad away from the device by pulling from the top edge.

Step 12

  • Check that all connections are removed from the keyboard. Take time and thoroughly analyze the components.

Check that all connections are removed from the keyboard. Take time and thoroughly analyze the components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 7 other contributors 


                    Elizabeth

Member since: 10/01/2016

541 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 4-3, Passmore Fall 2016                        

                                                  Member of USF Tampa, Team 4-3, Passmore Fall 2016 



                    USFT-PASSMORE-F16S4G3                     


                                            4 Members                     


                                            10 Guides authored

Etienne Olemba - Apr 25, 2020

Reply

Très facile. Merci. Et le fait d’avoir pu démonter mon clavier et souffler la poussière à l’intérieur à fait en sorte que les touches qui ne fonctionnaient plus ont recommencé à le faire. Merci encore.