Difficulty
Difficult
Steps
13
Time Required
20 - 30 minutes
Sections
1
- Motherboard
- 13 steps
Flags
0
BackAsus Transformer Book T100TAF
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Detach the screen from the keyboard using the silver button and pulling the screen in the upwards direction.
Detach the screen from the keyboard using the silver button and pulling the screen in the upwards direction.
1024
Step 2
- Pry the plastic backing off of the tablet using the plastic spudger, releasing all interior clips.
Pry the plastic backing off of the tablet using the plastic spudger, releasing all interior clips.
Step 3
- Unscrew all the silver screws from the motherboard
- 3.0 mm (3) silver phillips head
Unscrew all the silver screws from the motherboard
3.0 mm (3) silver phillips head
Step 4
- Unscrew all the black screws from the motherboard with a PH00 screwdriver
- 4.5 mm (4) black phillips head
- 4.5 mm (2) black phillips head
Unscrew all the black screws from the motherboard with a PH00 screwdriver
4.5 mm (4) black phillips head
4.5 mm (2) black phillips head
Step 5
- Detach the battery cable by steadily pulling it away from the motherboard with angled tweezers.
Detach the battery cable by steadily pulling it away from the motherboard with angled tweezers.
Step 6
- Gently pry the orange ribbon cable that is near the battery cable upwards with tweezers.
Gently pry the orange ribbon cable that is near the battery cable upwards with tweezers.
Step 7
- Remove the black strip along the top edge, releasing the two sets of connections.
- Adhesive may hold this strip to the motherboard.
Remove the black strip along the top edge, releasing the two sets of connections.
Adhesive may hold this strip to the motherboard.
Step 8
- Use tweezers to detach the black and red twisted pair cable from its connection to the motherboard.
Use tweezers to detach the black and red twisted pair cable from its connection to the motherboard.
Step 9
- Detach the two thin black wires by grabbing them with tweezers.
Detach the two thin black wires by grabbing them with tweezers.
Step 10
- With tweezers, gently flip the white clip up that is holding the white ribbon cable down. Pull the base of the white ribbon cable away from the motherboard with tweezers.
With tweezers, gently flip the white clip up that is holding the white ribbon cable down. Pull the base of the white ribbon cable away from the motherboard with tweezers.
Step 11
- Disconnect the bottom orange ribbon cable with tweezers by pulling it away from the edge of the device.
Disconnect the bottom orange ribbon cable with tweezers by pulling it away from the edge of the device.
Step 12
- Verify that cables are no longer attached to the motherboard.
Verify that cables are no longer attached to the motherboard.
Step 13
- Grab the motherboard with two hands, and gently lift it out of the device.
Grab the motherboard with two hands, and gently lift it out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Danielle Nendza
Member since: 10/03/2016
182 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
USF Tampa, Team 4-3, Passmore Fall 2016
Member of USF Tampa, Team 4-3, Passmore Fall 2016
USFT-PASSMORE-F16S4G3
4 Members
10 Guides authored
