Asus Transformer Book T100Tar Front Camera Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          10 - 15 minutes            

Sections

1

• Front Camera
• 7 steps

Flags

0

• BackAsus Transformer Book T100TAR

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Camera               

• Detach and separate the screen from the keyboard by pressing the silver release button at the base of the tablet.

Detach and separate the screen from the keyboard by pressing the silver release button at the base of the tablet.

1024

Step 2

• Take the metal spudger and insert it into the seam of the rear cover casing and gently pry upwards.
• If done correctly, you should feel the clips release.
• Ensure that all the clips are released by sliding the spudger along the four edges of the tablet.
• Do not force the clips to release. This will cause them to break, and if broken, the screen will become loose. Open the rear cover gently and with caution.

Take the metal spudger and insert it into the seam of the rear cover casing and gently pry upwards.

If done correctly, you should feel the clips release.

Ensure that all the clips are released by sliding the spudger along the four edges of the tablet.

Do not force the clips to release. This will cause them to break, and if broken, the screen will become loose. Open the rear cover gently and with caution.

Step 3

• Take off the rear case

Take off the rear case

Step 4

• Unscrew two 5mm screws from the camera board using a Phillips #0 Screwdriver.

Unscrew two 5mm screws from the camera board using a Phillips #0 Screwdriver.

Step 5

• Using a plastic opening tool, lift the white tab holding the power button cable, located on the camera board and pull out the cable strip.

Using a plastic opening tool, lift the white tab holding the power button cable, located on the camera board and pull out the cable strip.

Step 6

• Also using the plastic opening tool, gently lift up and remove the large black strip connecting the camera board to the motherboard.

Also using the plastic opening tool, gently lift up and remove the large black strip connecting the camera board to the motherboard.

Step 7

• Remove the camera board.

Remove the camera board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Alyssa Ballesteros                     

Member since: 09/07/2016

683 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 6-1, Remmell Fall 2016                        

                                                  Member of USF Tampa, Team 6-1, Remmell Fall 2016 



                    USFT-REMMELL-F16S6G1                     


                                            4 Members                     


                                            5 Guides authored