Asus Transformer Book T100Tar Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes            

Sections

1

• Keyboard
• 8 steps

Flags

0

• BackAsus Transformer Book T100TAR

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard               

• Detach and separate the screen from the keyboard by pressing the silver release button at the base of the tablet.

Detach and separate the screen from the keyboard by pressing the silver release button at the base of the tablet.

1024

Step 2

• Using a Phillips #0 screwdriver, unscrew six 4mm screws from the rear cover of the keyboard.
• The rest of the screws for this guide will be Phillips #0 head screws.
• Use the metal spudger to remove the rubber feet nearest to the top of the keyboard, where the connecting dock to the screen is. There are two 6mm screws under these rubber feet.

Using a Phillips #0 screwdriver, unscrew six 4mm screws from the rear cover of the keyboard.

The rest of the screws for this guide will be Phillips #0 head screws.

Use the metal spudger to remove the rubber feet nearest to the top of the keyboard, where the connecting dock to the screen is. There are two 6mm screws under these rubber feet.

Step 3

• Take the metal spudger and insert it into the seam of the rear cover casing and gently pry upwards.
• If done correctly, you should feel the clips release.
• Do not force the clips to release. This will cause them to break, making the screen loose. Open the rear cover gently and with caution.

Take the metal spudger and insert it into the seam of the rear cover casing and gently pry upwards.

If done correctly, you should feel the clips release.

Do not force the clips to release. This will cause them to break, making the screen loose. Open the rear cover gently and with caution.

Step 4

• Unscrew the screws on the base plate of the keyboard dock. There should be four 4mm screws along the bottom and four 6mm screws along the top, apart from a single 4mm screw (annotated in orange)

Unscrew the screws on the base plate of the keyboard dock. There should be four 4mm screws along the bottom and four 6mm screws along the top, apart from a single 4mm screw (annotated in orange)

Step 5

• Very carefully remove the black tape holding the metal plate in place.
• This tape is very sticky, so you might want to use tweezers to get it loose before peeling it off.

Very carefully remove the black tape holding the metal plate in place.

This tape is very sticky, so you might want to use tweezers to get it loose before peeling it off.

Step 6

• Lift up the small white tab constraining the white ribbon using the nylon spudger and carefully slide it out.
• Lift up the larger black tab constraining the black ribbon using the nylon spudger and carefully slide it out.
• The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

Lift up the small white tab constraining the white ribbon using the nylon spudger and carefully slide it out.

Lift up the larger black tab constraining the black ribbon using the nylon spudger and carefully slide it out.

The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

Step 7

• Unscrew a single 6mm screw holding the keyboard’s motherboard in place and remove it.

Unscrew a single 6mm screw holding the keyboard’s motherboard in place and remove it.

Step 8

• Unscrew three 4mm screws holding the trackpad in place and remove the trackpad.

Unscrew three 4mm screws holding the trackpad in place and remove the trackpad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Alyssa Ballesteros                     

Member since: 09/07/2016

683 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 6-1, Remmell Fall 2016                        

                                                  Member of USF Tampa, Team 6-1, Remmell Fall 2016 



                    USFT-REMMELL-F16S6G1                     


                                            4 Members                     


                                            5 Guides authored                     

zaiitindia - Aug 1, 2019

Reply

I need this keyboard

Tomi cruz - Aug 28, 2020

Reply

Disculpe quiero saber si me puede desirme la numeración de sircuitro del que va Serca del USB la piesa de 5 patas o me puede mandar fotos sercana este es mi correo cruztomi296@gmail.com

Maanda Rathogwa - Feb 20, 2021

Reply

I need assistance on where to buy charging port for my transformer book T100

Im looking for an asus transformer book T100 charging port around Cape Town