Difficulty

Moderate

Steps

7

Time Required

                          5 minutes

Sections

2

  • Battery
  • 4 steps
  • IO Board
  • 3 steps

Flags

0

  • BackAsus Transformer Flip Book TP200S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the back 6mm and 8mm screws with a J000 screwdriver.

Remove the back 6mm and 8mm screws with a J000 screwdriver.

1024

Step 2

  • Remove the back cover of the flip book by gently using a metal spudger.

Remove the back cover of the flip book by gently using a metal spudger.

Step 3

  • Unscrew the battery from the motherboard using a J000 screwdriver on the 3mm screws.

Unscrew the battery from the motherboard using a J000 screwdriver on the 3mm screws.

Step 4

  • The battery comes attached to the motherboard and needs to be disconnected before you can remove it.
  • Disconnect the battery from the motherboard by gently pulling out the connection with tweezers.
  • Gently remove the Wifi cables hooked to the rim of the battery
  • Remove the battery

The battery comes attached to the motherboard and needs to be disconnected before you can remove it.

Disconnect the battery from the motherboard by gently pulling out the connection with tweezers.

Gently remove the Wifi cables hooked to the rim of the battery

Remove the battery

Step 5

              IO Board
  • The IO Board will be the section of circuitry to the left. It’s held down by a couple of 3mm and 6mm screws and some device connections.
  • Unscrew the 3mm and 6mm screws on the IO Board with a phillips head J000 screwdriver.

The IO Board will be the section of circuitry to the left. It’s held down by a couple of 3mm and 6mm screws and some device connections.

Unscrew the 3mm and 6mm screws on the IO Board with a phillips head J000 screwdriver.

Step 6

  • After unscrewing, gently unplug all the connections to the IO Board with tweezers. We have highlighted where these connections are located in our images.

After unscrewing, gently unplug all the connections to the IO Board with tweezers. We have highlighted where these connections are located in our images.

Step 7

  • Remove the final connections from the IO board with tweezers.

Remove the final connections from the IO board with tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Alejandro Lopez

Member since: 02/15/2018

662 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S17-G2, Boczar Spring 2018                        

                                                  Member of USF Tampa, Team S17-G2, Boczar Spring 2018 



                    USFT-BOCZAR-S18S17G2                     


                                            3 Members                     


                                            5 Guides authored