Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Battery
  • 4 steps
  • WiFi Card
  • 2 steps

Flags

0

  • BackAsus Transformer Flip Book TP200S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the back 6mm and 8mm screws with a J000 screwdriver.

Remove the back 6mm and 8mm screws with a J000 screwdriver.

1024

Step 2

  • Remove the back cover of the flip book by gently using a metal spudger.

Remove the back cover of the flip book by gently using a metal spudger.

Step 3

  • Unscrew the battery from the motherboard using a J000 screwdriver on the 3mm screws.

Unscrew the battery from the motherboard using a J000 screwdriver on the 3mm screws.

Step 4

  • The battery comes attached to the motherboard and needs to be disconnected before you can remove it.
  • Disconnect the battery from the motherboard by gently pulling out the connection with tweezers.
  • Gently remove the Wifi cables hooked to the rim of the battery
  • Remove the battery

The battery comes attached to the motherboard and needs to be disconnected before you can remove it.

Disconnect the battery from the motherboard by gently pulling out the connection with tweezers.

Gently remove the Wifi cables hooked to the rim of the battery

Remove the battery

Step 5

              WiFi Card
  • The WiFi card will be covered by tape and attached to the motherboard.
  • Remove the tape from the WiFi card.

The WiFi card will be covered by tape and attached to the motherboard.

Remove the tape from the WiFi card.

Step 6

  • Unscrew the WiFi card with a JIS #000 screwdriver.
  • Remove the motherboard connection from the WiFi card with tweezers.
  • Pull out the WiFi card.

Unscrew the WiFi card with a JIS #000 screwdriver.

Remove the motherboard connection from the WiFi card with tweezers.

Pull out the WiFi card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Alejandro Lopez

Member since: 02/15/2018

662 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S17-G2, Boczar Spring 2018                        

                                                  Member of USF Tampa, Team S17-G2, Boczar Spring 2018 



                    USFT-BOCZAR-S18S17G2                     


                                            3 Members                     


                                            5 Guides authored