Difficulty

Moderate

Steps

5

Time Required

                          5 minutes

Sections

1

  • Charging Port
  • 5 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackAsus Transformer Pad Infinity

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Charging Port
  • Take off the screen and the big motherboard.

Take off the screen and the big motherboard.

1024

Step 2

  • Disconnect the long silver ribbon connector from the screen.
  • Remove the orange ribbon connector with the two connections.

Disconnect the long silver ribbon connector from the screen.

Remove the orange ribbon connector with the two connections.

Step 3

  • Flip up the piece securing the ribbon to the big motherboard and remove the ribbon from the motherboard.
  • Note: This will have tape covering it, make sure not to cut the ribbon or scratch any other parts if you are looking to preserve these things.

Flip up the piece securing the ribbon to the big motherboard and remove the ribbon from the motherboard.

Note: This will have tape covering it, make sure not to cut the ribbon or scratch any other parts if you are looking to preserve these things.

Step 4

  • Remove the two screws holding the actual port, that goes to the outside of the device, in. This piece will be connected to the case.

Remove the two screws holding the actual port, that goes to the outside of the device, in. This piece will be connected to the case.

Step 5

  • Once removing the damaged charging port, put in your new part and reassemble the device and check if the new charging port works.

Once removing the damaged charging port, put in your new part and reassemble the device and check if the new charging port works.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Allison Poh

Member since: 10/20/2015

549 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 5-1, Gulbrandsen Fall 2015                        

                                                  Member of UMass Dartmouth, Team 5-1, Gulbrandsen Fall 2015 



                    UMASSD-GULBRANDSEN-F15S5G1                     


                                            3 Members                     


                                            10 Guides authored