Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

1

  • Glass
  • 5 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackAsus Transformer Pad Infinity

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Glass
  • Disconnect the long silver ribbon connector from the screen.
  • Remove the orange ribbon connector with the two connections.

Disconnect the long silver ribbon connector from the screen.

Remove the orange ribbon connector with the two connections.

1024

Step 2

  • Remove the 4 screws around the metal portion of the screen (this is the LCD display).

Remove the 4 screws around the metal portion of the screen (this is the LCD display).

Step 3

  • Peel the orange ribbon back (it has adhesive sticking itself to the black electric tape looking stuff surrounding the metal portion).

Peel the orange ribbon back (it has adhesive sticking itself to the black electric tape looking stuff surrounding the metal portion).

Step 4

  • Carefully place a preferably plastic tool between the glass portion and the electric tape looking stuff and pry off the screen from that portion.
  • Note: Take care as you’re dealing directly with with the glass and the way your touch input gets into the device.

Carefully place a preferably plastic tool between the glass portion and the electric tape looking stuff and pry off the screen from that portion.

Note: Take care as you’re dealing directly with with the glass and the way your touch input gets into the device.

Step 5

  • Once removed, replace the glass screen back onto the LCD display.
  • The new screen may or may not have new adhesive depending on where you got it. If it doesn’t, make sure you secure it with the screws safely.

Once removed, replace the glass screen back onto the LCD display.

The new screen may or may not have new adhesive depending on where you got it. If it doesn’t, make sure you secure it with the screws safely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Allison Poh

Member since: 10/20/2015

549 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 5-1, Gulbrandsen Fall 2015                        

                                                  Member of UMass Dartmouth, Team 5-1, Gulbrandsen Fall 2015 



                    UMASSD-GULBRANDSEN-F15S5G1                     


                                            3 Members                     


                                            10 Guides authored