Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

  • Headphone Jack
  • 8 steps

Flags

2

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAsus Transformer Pad TF103C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Headphone Jack
  • Make sure power is off.
  • Insert plastic opening tool on the side of the tablet.
  • You can use a thin screwdriver if you don’t have an opening tool.
  • Gently pull upwards and carefully pry open the Transformer pad.

Make sure power is off.

Insert plastic opening tool on the side of the tablet.

You can use a thin screwdriver if you don’t have an opening tool.

Gently pull upwards and carefully pry open the Transformer pad.

1024

Step 2

  • Slide the tool along all four edges and continue to pull the tool upwards.

Slide the tool along all four edges and continue to pull the tool upwards.

Step 3

  • Remove the back cover once it is detached and set it aside.
  • Rotate tablet to match picture to make the guide easier to follow

Remove the back cover once it is detached and set it aside.

Rotate tablet to match picture to make the guide easier to follow

Step 4

  • Remove the tape and unplug wire that attaches to both speakers from soundboard.

Remove the tape and unplug wire that attaches to both speakers from soundboard.

Step 5

  • Use the +J000 screwdriver to unscrew and remove the M2 plastic holder.

Use the +J000 screwdriver to unscrew and remove the M2 plastic holder.

Step 6

  • Remove black tape from ribbon cable and separate the cable from the soundboard.

Remove black tape from ribbon cable and separate the cable from the soundboard.

Step 7

  • Use the +J000 to remove three screws from soundboard.
  • Keep the screws together and organized. (Label, if necessary).

Use the +J000 to remove three screws from soundboard.

Keep the screws together and organized. (Label, if necessary).

Step 8

  • Remove soundboard which has the headphone jack attached to it.

Remove soundboard which has the headphone jack attached to it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Tyler Ellis

Member since: 10/28/2015

668 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UMass Dartmouth, Team 3-6, Shastany Fall 2015                        

                                                  Member of UMass Dartmouth, Team 3-6, Shastany Fall 2015 



                    UMASSD-SHASTANY-F15S3G6                     


                                            4 Members                     


                                            5 Guides authored