Difficulty
Moderate
Steps
9
Time Required
15 minutes
Sections
1
- Speakers
- 9 steps
Flags
0
BackAsus Transformer Pad TF103C
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Link to Asus website.
What you need
Step 1
Speakers
- Shut down your tablet before beginning the repair.
- Insert the plastic opening tool on the side of the tablet.
- Gently pull upwards and carefully pry open the tablet.
Shut down your tablet before beginning the repair.
Insert the plastic opening tool on the side of the tablet.
Gently pull upwards and carefully pry open the tablet.
1024
Step 2
- Slide the tool around all four sides of the tablet while gently pulling the tool up.
Slide the tool around all four sides of the tablet while gently pulling the tool up.
Step 3
- Remove the back cover once you have loosened it from the tablet. Set the back cover aside.
- Rotate the tablet to match the picture.
Remove the back cover once you have loosened it from the tablet. Set the back cover aside.
Rotate the tablet to match the picture.
Step 4
- Carefully unplug the rainbow cable from the motherboard.
Carefully unplug the rainbow cable from the motherboard.
Step 5
- Use the plastic opening tool to carefully pry the battery out from the frame.
Use the plastic opening tool to carefully pry the battery out from the frame.
Step 6
- Use the JIS #000 screwdriver to remove the four screws.
- Keep the screws together and organized. (Label the screws, if necessary).
Use the JIS #000 screwdriver to remove the four screws.
Keep the screws together and organized. (Label the screws, if necessary).
Step 7
- Take the ground wire out from the top of the TF103C-L (left) speaker.
- If you pull on the wire too much it will break off.
- If you break the wire off you can solder it back on.
Take the ground wire out from the top of the TF103C-L (left) speaker.
If you pull on the wire too much it will break off.
If you break the wire off you can solder it back on.
Step 8
- Remove the tape and unplug the wire that is connected to both of the speakers.
Remove the tape and unplug the wire that is connected to both of the speakers.
Step 9
- Remove the two speakers from the frame.
Remove the two speakers from the frame.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 9 other contributors
Tyler Ellis
Member since: 10/28/2015
668 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 3-6, Shastany Fall 2015
Member of UMass Dartmouth, Team 3-6, Shastany Fall 2015
UMASSD-SHASTANY-F15S3G6
4 Members
5 Guides authored
