Difficulty

Moderate

Steps

8

Time Required

                          10 - 20 minutes

Sections

2

  • Rear Cover
  • 4 steps
  • Battery
  • 4 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackAsus Transformer T100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Cover
  • Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.
  • Remove the tablet by lifting up.

Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.

Remove the tablet by lifting up.

1024

Step 2

  • Insert the opening tool into the seam of the tablet casing and gently pry upwards.
  • With a little force, you will feel the clips release.

Insert the opening tool into the seam of the tablet casing and gently pry upwards.

With a little force, you will feel the clips release.

Step 3

  • Slide the tool along all four edges of the tablet, making sure that all the clips are released.
  • Do not break these clips; otherwise, the screen will become less secure.

Slide the tool along all four edges of the tablet, making sure that all the clips are released.

Do not break these clips; otherwise, the screen will become less secure.

Step 4

  • Remove the rear casing.

Remove the rear casing.

Step 5

              Battery
  • Remove the copper tape carefully.

Remove the copper tape carefully.

Step 6

  • Gently pull back the yellow transparent plastic covering on top of the battery connection port.

Gently pull back the yellow transparent plastic covering on top of the battery connection port.

Step 7

  • Rotate the device so the top of the screen is facing you. Place the plastic opening tool underneath the battery and gently pry upwards to lift the battery out.
  • The battery wire harness will slide out as the battery is pried up.

Rotate the device so the top of the screen is facing you. Place the plastic opening tool underneath the battery and gently pry upwards to lift the battery out.

The battery wire harness will slide out as the battery is pried up.

Step 8

  • Remove the battery by slowly peeling the battery away from the connected side.
  • The adhesive on the back will pull away from the battery.

Remove the battery by slowly peeling the battery away from the connected side.

The adhesive on the back will pull away from the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      66 other people completed this guide.

Author

                                      with 9 other contributors 


                    Taylor Pantiga

Member since: 04/14/2014

1,572 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 13-31, Maness Spring 2014                        

                                                  Member of Cal Poly, Team 13-31, Maness Spring 2014 



                    CPSU-MANESS-S14S13G31                     


                                            3 Members                     


                                            6 Guides authored

christian cantu - Nov 13, 2014

Reply

So I switched out my screen for it and its not turning on and I checked it everything was correctly place, but my Asus transformer was dead before hand so I tried charging it, and it wasn’t charging, so I checked it and it seems the battery wire harness is loose enough to come off, is it possible to fix that?

Matheus Moraes - Dec 3, 2015

Hi christian! How did you solve this problem? That happened to me too…

RJ - Jun 18, 2015

Reply

what is the battery part # for t100 and can you purchase it?

thank you

Jack Riggins - May 2, 2016

Reply

Part number is C12N1320. They are available from a variety of sources.

JPWhite - May 15, 2016

Reply

Thanks for detailed guide.

I could not get the transformer tablet to power up no matter which buttons I held for how long or in what sequence. Unplugging the battery internally and replugging fixed a hung device.