Asus Transformer T100 Button Module Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          15 - 20 minutes            

Sections

2

• Rear Cover
• 4 steps
• Button Module
• 4 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackAsus Transformer T100

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Cover               

• Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.
• Remove the tablet by lifting up.

Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.

Remove the tablet by lifting up.

1024

Step 2

• Insert the opening tool into the seam of the tablet casing and gently pry upwards.
• With a little force, you will feel the clips release.

Insert the opening tool into the seam of the tablet casing and gently pry upwards.

With a little force, you will feel the clips release.

Step 3

• Slide the tool along all four edges of the tablet, making sure that all the clips are released.
• Do not break these clips; otherwise, the screen will become less secure.

Slide the tool along all four edges of the tablet, making sure that all the clips are released.

Do not break these clips; otherwise, the screen will become less secure.

Step 4

• Remove the rear casing.

Remove the rear casing.

Step 5

              Button Module               

• Unclip the white connection clip using a pair of tweezers.

Unclip the white connection clip using a pair of tweezers.

Step 6

• Pull the connection apparatus from the connection clip on the board using a pair of tweezers.

Pull the connection apparatus from the connection clip on the board using a pair of tweezers.

Step 7

• Gently fold the connection apparatus back away from your work area.

Gently fold the connection apparatus back away from your work area.

Step 8

• Remove the screws using a Phillips Head #1 screwdriver.
• Remove the power button module.

Remove the screws using a Phillips Head #1 screwdriver.

Remove the power button module.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Taylor Pantiga                     

Member since: 04/14/2014

1,572 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team 13-31, Maness Spring 2014                        

                                                  Member of Cal Poly, Team 13-31, Maness Spring 2014 



                    CPSU-MANESS-S14S13G31                     


                                            3 Members                     


                                            6 Guides authored                     

Rudolf Guys - Nov 13, 2018

Reply

My problem is that when reinstalltng the back cover the button does not fit the button module to press the on/off switch. The switch works allright.

What can i do? At this moment I can only switch the tablet on after removing the back cover.