Difficulty
Easy
Steps
9
Time Required
10 - 15 minutes
Sections
2
- Rear Cover
- 4 steps
- Front Facing Camera Board
- 5 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackAsus Transformer T100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Cover
- Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.
- Remove the tablet by lifting up.
Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.
Remove the tablet by lifting up.
1024
Step 2
- Insert the opening tool into the seam of the tablet casing and gently pry upwards.
- With a little force, you will feel the clips release.
Insert the opening tool into the seam of the tablet casing and gently pry upwards.
With a little force, you will feel the clips release.
Step 3
- Slide the tool along all four edges of the tablet, making sure that all the clips are released.
- Do not break these clips; otherwise, the screen will become less secure.
Slide the tool along all four edges of the tablet, making sure that all the clips are released.
Do not break these clips; otherwise, the screen will become less secure.
Step 4
- Remove the rear casing.
Remove the rear casing.
Step 5
Front Facing Camera Board
- The camera board is located in the red square in this image.
The camera board is located in the red square in this image.
Step 6
- Remove the two screws on the camera board using a Phillips #1 Screwdriver.
Remove the two screws on the camera board using a Phillips #1 Screwdriver.
Step 7
- Lift up the power button cable retention clip on the motherboard and pull the cable out.
Lift up the power button cable retention clip on the motherboard and pull the cable out.
Step 8
- On the camera connection apparatus, locate the silver tape that connects to the tablet.
- Peel the silver tape off of the tablet on both sides of the connection apparatus.
- If this step has been completed correctly, the camera board should be loose, with the tape still attached to the connection apparatus.
On the camera connection apparatus, locate the silver tape that connects to the tablet.
Peel the silver tape off of the tablet on both sides of the connection apparatus.
If this step has been completed correctly, the camera board should be loose, with the tape still attached to the connection apparatus.
Step 9
- Gently pull the Orange ribbon cable out of the connection port.
- This port has no clip. The orange apparatus should slide out with a small tug.
Gently pull the Orange ribbon cable out of the connection port.
This port has no clip. The orange apparatus should slide out with a small tug.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 9 other contributors
Taylor Pantiga
Member since: 04/14/2014
1,572 Reputation
6 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 13-31, Maness Spring 2014
Member of Cal Poly, Team 13-31, Maness Spring 2014
CPSU-MANESS-S14S13G31
3 Members
6 Guides authored
Alexius Hoopakele Ae - Jan 20, 2018
Reply
Hello, can you please tell a manufacturer of the camera (is it writter somethere on it)?