Asus Transformer T100 Rear Cover Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Rear Cover
• 4 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackAsus Transformer T100

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Cover               

• Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.
• Remove the tablet by lifting up.

Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.

Remove the tablet by lifting up.

1024

Step 2

• Insert the opening tool into the seam of the tablet casing and gently pry upwards.
• With a little force, you will feel the clips release.

Insert the opening tool into the seam of the tablet casing and gently pry upwards.

With a little force, you will feel the clips release.

Step 3

• Slide the tool along all four edges of the tablet, making sure that all the clips are released.
• Do not break these clips; otherwise, the screen will become less secure.

Slide the tool along all four edges of the tablet, making sure that all the clips are released.

Do not break these clips; otherwise, the screen will become less secure.

Step 4

• Remove the rear casing.

Remove the rear casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 12 other contributors 

                    Taylor Pantiga                     

Member since: 04/14/2014

1,572 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team 13-31, Maness Spring 2014                        

                                                  Member of Cal Poly, Team 13-31, Maness Spring 2014 



                    CPSU-MANESS-S14S13G31                     


                                            3 Members                     


                                            6 Guides authored                     

darimini76 - Aug 27, 2015

Reply

This is completely wrong. The outside case of the ASUS T100 is brushed metal.

Jordi Vanwinkle - Aug 31, 2015

there is also a white version, so actually not wrong

ldajnowski - Sep 14, 2015

Reply

Was able to remove the back cover. Needed to unplug the battery and plug it back in so the the Notebook would boot. It now boots perfectly but

when we replace the back cover it snaps in at the sides and bottom but

WILL NOT Snap in on the top (where the power switch is). All tabs on the back cover and the frame are perfect and not broken but the back cover will not snap closed completely at the top. It still powers on but the power switch sticks and have to press near the switch so it releases in the back cover cavity at the top. Anyone have any ideas on this issue. Thanks

Bac Nguyen Ninh - Mar 12, 2020

I had the same problem. Answer is not to start assemble from the top. Instead, start from the side where there is the SD slot or from the bottom end. Then everything will go. Good luck.

Milk - Dec 18, 2015

Reply

Take out your Micro Sd card first!! You will snap it in two!