Asus Tuf Gaming F15 Fx506L Back Cover Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

Back Cover
4 steps

Flags

BackASUS TUF Gaming F15 FX506L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Unfasten the back cover

For your safety, discharge the battery below 25% and power down your device before disassembly.
Use a Phillips screwdriver to remove the 10 screws securing the back cover:
Seven 11.6 mm screws
Two 14.6 mm screws
One 6 mm screw
Use a Phillips screwdriver to loosen the captive screw.
Loosening this captive screw will pop up and separate the bottom-right corner of the back cover from the chassis.
During reassembly, tighten the captive screw before the rest of the screws.

For your safety, discharge the battery below 25% and power down your device before disassembly.

Use a Phillips screwdriver to remove the 10 screws securing the back cover:

Seven 11.6 mm screws

Two 14.6 mm screws

One 6 mm screw

Use a Phillips screwdriver to loosen the captive screw.

Loosening this captive screw will pop up and separate the bottom-right corner of the back cover from the chassis.

During reassembly, tighten the captive screw before the rest of the screws.

1024

Step 2

              Release the clips

Insert an opening pick between the bottom-right corner of the back cover and the chassis, near the captive screw.
Pry up to release the clips securing the back cover.
You’ll hear a click whenever a clip is released.

Insert an opening pick between the bottom-right corner of the back cover and the chassis, near the captive screw.

Pry up to release the clips securing the back cover.

You’ll hear a click whenever a clip is released.

Step 3

              Release the remaining clips

Insert your opening pick again between the top-left corner of the back cover and the chassis.
Insert the pick at a steep angle. Pry up to release the remaining clips securing the back cover.

Insert your opening pick again between the top-left corner of the back cover and the chassis.

Insert the pick at a steep angle. Pry up to release the remaining clips securing the back cover.

Step 4

              Remove the back cover

Lift the back cover off the chassis and remove it.
If your back cover is stuck to the chassis, use an opening pick to release the clips around the back cover’s perimeter.

Lift the back cover off the chassis and remove it.

If your back cover is stuck to the chassis, use an opening pick to release the clips around the back cover’s perimeter.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our ASUS TUF laptop answers community for help.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Clay Eickemeyer

Member since: 09/19/2022

14,946 Reputation

                                      125 Guides authored                  



                       Badges:
                       27







                                                        +24 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team